Danh mục

C9124AXI-ROW - Cisco Catalyst 9124AX Series Access Points, Wi-Fi 6 (802.11ax), 4x4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams, Outdoor environments, internal omnidirectional antenna, ROW Regulatory Domain.

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị Wifi Cisco Catalyst C9124AXI-ROW Access Point Outdoor environments with internal omnidirectional antenna

Model

C9124AXI-ROW

Software

● Cisco IOS® XE Software Release 17.6.2 or later

Supported WLAN controllers

● Cisco Catalyst 9800 Series Wireless Controllers

802.11n version 2.0 (and related) capabilities

● 4x4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

802.11ac

● 4x4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

802.11ax

● 4x4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams

Integrated antenna

● 2.4 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional
● 5 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional
● BLE Antenna Gain: 5 dBi, internal antenna, Vertical Polarization, omnidirectional

Interfaces

● 1x 100/1000/2500 BASE-T (Ethernet) uplink interface
● 1x Gigabit Ethernet SFP
● Supports PoE output (802.3af compliant PSE) on the 1x 10/100/1000 BASE-T (Ethernet) downlink interface if C9124AX powered from one of the following:
◦ UPOE or 802.3bt inline power source (Switch or Power Injector)
◦ DC input (with external power supply rated ³ 60W)
● Management console port (RJ-45)

Indicators

● Status LED indicates boot loader status, association status, operating status, boot loader warnings

Dimensions (W x L x H)

● Access point (without mounting brackets): 25.9 x 23.3 x 8.1 cm

Weight

● 2.9 kg

Input power requirements

● 802.3af Power over Ethernet (PoE), 802.3at PoE+, 802.3bt PoE++, Cisco Universal PoE (Cisco UPOE®)
● Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=
● Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at)
● DC power source: Auxiliary DC input, 24V to 56V

PoE	Radio 0 SS	Radio 1 SS	MGIG	SFP	1G	POE O/P
.3af	Disabled	Disabled	1G	N	N	N
.3at	2x2	2x2	1G	N	Y	N
.3bt/UPOE/ DC	4x4	4x4	2.5G	Y	Y	Y

Environmental

● Nonoperating (storage) temperature: -40° to 185°F (-40° to 85°C)
● Nonoperating altitude test: 17,000 ft (5182 m)
● Operating temperature: -40° to 149°F (-40° to 65°C) with no solar loading, -40° to 131°F (-40° to 55°C) with solar loading
● Operating altitude test: 17,000 ft (5182 m)
● Operating humidity: 0% to 100% (condensing)
● IEC 60529 Ingress Rating: IP66/IP67
● Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts
● Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.)
● Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas)
● Solar radiation: EN 60068-2-5 (1120 W/m2)
● Vibration: MIL-STD-810, Method 514.4

Data sheet Cisco Catalyst 9124AX Series Access Points