Thiết bị mạng không dây Indoor Wireless Access Point FortiNet FortiAP 231E (FAP-231E)
Mã sản phẩm | FAP-231E |
Hardware | |
Hardware Type | Indoor AP |
Number of Radios | 3 + 1 BLE |
Number of Antennas | 6 Internal + 1 BLE internal |
Antenna Type and peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities | 2.4 GHz or 5.0 GHz (high band) a/b/g/n/ac W2 (2x2:2 stream) 20/40/80 MHz |
Radio 2 Capabilities | 5.0 GHz a/n/ac W2 (2x2:2 stream) 20/40/80 MHz |
Radio 3 Capabilities | 2.4/5.0 GHz dual band b/g/n (2x2:2 stream) 20/40 MHz |
Maximum Data Rate | Radio 1: up to 867 Mbps Radio 2: up to 867 Mbps Radio 3: up to 400 Mbps |
Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power |
Interfaces | 2x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) | IEEE 802.3af or 802.3.at |
Simultaneous SSIDs | Up to 24 (21 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP , Web Captive Portal , MAC blacklist & whitelist |
Maximum Tx Power | 2.4 GHz: 24 dBm / 251 mW (2 chains combined)* 5 GHz: 25 dBm / 316 mW (2 chains combined)* |
Kensington Lock | Yes |
IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at |
SSID Types Supported | Local-Bridge, Mesh, & Tunnel |
Per Radio Client Capacity | Up to 512 for Radio 1 & 2, Up to 128 for Radio 3 |
Cellular Co-existence** | Yes |
LED Off Mode | Yes |
Advanced 802.11 Features | |
802.11ac MU-MIMO Wave 2 | Yes |
Transmit Beam Forming (TxBF) | Yes |
Low-Density Parity Check (LDPC) Encoding | Yes |
Maximum Likelihood Demodulation (MLD) | Yes |
Maximum Ratio Combining (MRC) | Yes |
A-MPDU and A-MSDU Packet Aggregation | Yes |
MIMO Power Save | Yes |
Short Guard Interval | Yes |
OFDMA | No |
Wireless Monitoring Capabilities | |
Rogue Scan Radio Modes | Background, Dedicated |
WIPS / WIDS Radio Modes | Background, Dedicated |
Packet Sniffer Mode | Yes |
Spectrum Analyzer | Yes |
Dimensions | |
Length x Width x Height | 7.87 x 7.87 x 1.81 inches (200 x 200 x 46 mm) |
Weight | 1.2 lbs (0.55 kg) |
Package (shipping) Weight | 2.5 lbs (1.15 kg) |
Mounting Options | Ceiling, T-Rail, and Wall |
Included Accessories | Mount kits for Ceiling, T-Rail, and Wall |
Environment | |
Power Supply | SP-FAP200-PA-XX, GPI-130 |
Power Consumption (Maximum) | 17 W with 802.3at PoE,12.9 W with 802.3af PoE- reduced TX power (13dBm per radio) |
Humidity | 5–93% non-condensing |
Operating / Storage Temperature | 32–104°F (0–40°C) / -31–158°F (-35–70°C) |
Directives | Low Voltage Directive • RoHS |
UL2043 Plenum Material | Yes |
Mean Time Between Failures | >10 Years |
IP Rating | - |
Surge Protection Built In | - |
Hit-less PoE Failover | No |
Certifications | |
WiFi Alliance Certified | No |
DFS | FCC, CE |
SKU | Description |
FC-10-P231E-247-02-DD | 24x7 FortiCare Contract |
FAP-231E: Indoor Wireless AP - Tri-radio (802.11 a/b/g/n/ac Wave 2, 802.11a/n/ac Wave 2, 802.11 b/g/n, 2x2 MU-MIMO), internal antennas, 2 x 10/100/1000 RJ45 port, BT / BLE. Ceiling/wall mount kit included.For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP200-PA.
FC-10-P231E-247-02-DD: 24x7 FortiCare Contract
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt