Thiết bị mạng Switch Trendnet TI-PG62B
| Model |
TI-PG62B |
| Device Interface |
- 4 x Gigabit PoE+ ports
- 2 x 100/1000 Mbps SFP slots
- 6-pin removable terminal block
- LED indicators
- DIP switch
- DIN-Rail mount
- Wall mount
- Grounding point
|
| Data Transfer Rate |
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
|
| Performance |
- Data RAM Buffer: 1024 KB
- Switching Fabric: 12 Gbps
- MAC Address Table: 1 K entries
- Jumbo Frame: 9 KB
- Forwarding rate: 8.9 Mpps (64-byte packet size)
|
| Special Features |
- Hardened components rated for extreme temperatures
- Supports 12/24/48 power inputs
- Voltage booster boost up to 55V DC
- Redundant power inputs
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 6KV support
|
| DC Power |
- Input: 12/24/48 V DC
- Output: up to 55 V DC
- Compatible power supply: TI-S12048 (sold separately)
- Consumption: Max. 5.76 Watts (no PoE)
|
| PoE |
- PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC
- PoE budget: 60 W @ 12 VDC
|
| Terminal Block |
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.34 mm^2 to 2.5 mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
- Wire strip length: 7-8 mm
|
| DIP Switch |
- 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
- 2: OFF (SFP 1000 M, default), ON (SFP 100 M)
|
| Alarm Relay Contact |
- Relay outputs with current carrying capacity of 1A, 24V DC
- Open circuit mode when one power source is connected
- Short circuit mode when two power sources are connected
|
| MTBF |
|
| Housing |
- IP30 metal case
- DIN-rail mount
- Wall mount
- Grounding point
- 6 KV ESD protection
|
| Operating Temperature |
- - 40 to 75 °C (-40 to 167 °F)
|
| Operating Humidity |
|
| Dimensions |
- 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
|
| Weight |
|
