Thiết bị phát sóng Wifi Aruba AP-635 (R7J27A)
| Model |
AP-635 (R7J27A) |
| Wi-Fi radio specifications |
- AP type: Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO
- 2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices
- 5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices
- 6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices
- Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
|
| Wi-Fi antennas |
- Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.6dBi in 2.4GHz, 7.0dBi in 5GHz and 6.3dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
- Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9dBi in 2.4GHz, 4.9dBi in 5GHz and 4.3dBi in 6GHz.
|
| Interfaces and features |
- E0, E1: Two Ethernet wired network ports (RJ-45)
- Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
- 2.5Gbps speed complies with NBase-T and 802.3bz specifications
- POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 4 or higher)
- 802.3az Energy Efficient Ethernet (EEE)
- DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector)
- Capable of sourcing up to 1A / 5W to an attached device
- Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
- BLE: up to 5dBm transmit power (class 1) and -100dBm receive sensitivity (125kbps)
- Zigbee: up to 5dBm transmit power and -97dBm receive sensitivity (250kbps)
- Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 3.0dB
|
| Power sources and power consumption |
- Maximum (worst-case) power consumption (without / with a USB device attached):
- DC powered: 20.7W / 26.4W
- POE powered: 23.8W / 29.4W
- This assumes that up to 5W is supplied to the attached USB device
- Maximum (worst-case) power consumption in idle mode: 8.7W / 14.2W (DC) or 11.7W / 17.2W (POE)
- Maximum (worst-case) power consumption in deep-sleep mode: 1.1W (DC) or 1.9W (POE)
|
| Mechanical specifications |
- Dimensions/weight (AP-635; unit without mount bracket):
- 220mm (W) x 220mm (D) x 50mm (H)
- 1300g
- Dimensions/weight (AP-635; shipping):
- 250mm (W) x 240mm (D) x 85mm (H)
- 1650g
|
| Environmental specifications |
- Operating conditions
- emperature: 0C to +50C / +32F to +122F
- Relative humidity: 5% to 95%
- ETS 300 019 class 3.2 environments
- AP is plenum rated for use in air-handling spaces
- Storage and transportation conditions
- Temperature: -40C to +70C / -40F to +158F
- Relative humidity: 10% to 100%
- ETS 300 019 classes 1.2 (storage) and 2.3 (transportation) environments
|
