Danh mục

Cisco CBW145AC-E: CBW145AC 802.11ac 2x2 Wave 2 Access Point Wall Plate ● Cisco Business 145AC Access Point ● 2x2 MU-MIMO with two spatial streams ● 802.11ac Wave 2 standard ● Four GE ports with PoE support ● Simplified management with Cisco Business Mobile app ● Flexible deployment with Cisco Wireless 100 Series Mesh Extender

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị phát sóng Wifi Cisco Business 145AC Access Point

Model	CBW145AC-E
Authentication and security	● Wi-Fi Protected Access 2 and 3 (WPA2 and WPA3) ● 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA) ● 802.11r and 802.11i
Maximum clients	● Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point
Max # of Mesh Extenders	● Maximum number of associated Cisco Business mesh extenders: 25 per Access Point, up to 8 hops
802.11ac	● 2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps ● 20-, 40-, and 80-MHz channels ● Dynamic Frequency Selection (DFS)
Data rates supported	802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
	802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
	802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
	802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Available transmit power settings	2.4 GHz Up to 20 dBm	5 GHz Up to 20 dBm
Integrated antennas	● 2.4 GHz, gain 2 dBi ● 5 GHz, gain 3 dBi
Interfaces	● 1x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE ● 3x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port: ◦ PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af ● One passive pass-through port, RJ-45 (back to bottom)
Indicators	● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in. (89 x 140 x 31.5 mm)
Weight	● Access point without mounting bracket or any other accessories: 10 oz (280 g)
Environmental	● Operating ◦ Temperature: 32° to 104°F (0° to 50°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Maximum altitude: 9843 ft (3000 m) at 40°C ● Nonoperating (storage and transportation) ◦ Temperature: -22° to 158°F (-30° to 70°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Maximum altitude: 15,000 ft (4500 m) at 25°C
System	● 1 GB DRAM ● 256 MB flash ● 710-MHz quad-core processor
Powering options	● 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended ● Optional Cisco Business PoE injector (CB-PWRINJ-xx)
Power draw	● 8.5W (maximum, without PoE out)
Physical security	● Torx security screw, included with the access point ● Kensington lock slot to lock device to mounting bracket
Mounting	● Bracket is included with the access point
Warranty	Cisco Business limited lifetime hardware warranty Free software updates, no service contract required