- Radios
- 2.4 GHz 802.11b/g/n client access radio
- 5 GHz 802.11a/n/ac client access radio
- 2.4 & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
- 2.4 GHz Bluetooth radio with Bluetooth Low Energy and Beacon support
- Concurrent operation of all four radios
- Max aggregate frame rate 2.5 Gbit/s
- Supported frequency bands (country-specific restrictions apply):
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350 GHz (UNII-2)
- 5.470-5.600, 5.660-5.725 (UNII-2e)
- 5.725-5.825 GHz (UNII-3)
- Antenna
- Integrated omni-directional antennas (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
- Individual antenna elements for each radio
- 802.11ac Wave 2 & 802.11n Capabilities
- 4x4 multiple input, multiple output (MIMO) with four spatial streams
- SU-MIMO and MU-MIMO support
- Maximal ratio combining (MRC) & beamforming
- 20 & 40 MHz channels (802.11n); 20, 40, and 80MHz channels (802.11ac)
- Up to 256-QAM on both 2.4 & 5 GHz
- Packet aggregation
- Cyclic Shift Diversity (CSD) for improved downlink wireless performance
- Space-time block coding (STBC) for increased range and improved reception
- Aggregate MAC Protocol Data Unit (A-MPDU) and Aggregate MAC Service Data Unit (A-MSDU) for frame aggregation
- Additional Wireless Features
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
- Power
- Power over Ethernet: 37 - 57 V (802.3at required; functionality-restricted 802.3af mode supported)
- Alternative 12V DC input
- Power consumption: 21 W max (802.3at)
- Power over Ethernet injector and DC adapter sold separately
- Interfaces
- 2 × 10/100/1000Base-T Ethernet (RJ45)
- 1 × DC power connector (5.5mm x 2.5mm, center positive)
- Mounting
- All standard mounting hardware included
- Desktop, ceiling, and wall mount capable
- Ceiling tile rail (9/16, 15/16 or 1 ½" flush or recessed rails), assorted cable junction boxes
- Bubble level on mounting cradle for accurate horizontal wall mounting
- Physical Security
- Two security screw options (included)
- Kensington lock hard point
- Concealed mount plate with anti-tamper cable bay
- Environment
- Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
- Humidity: 5 to 95% non-condensing
- Physical Dimensions
- 10.56” x 6.38” x 1.58” (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate
- Weight: 28.9 oz (820g)
- Security
- Integrated Layer 7 firewall with mobile device policy management
- Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
- Flexible guest access with device isolation
- VLAN tagging (802.1q) and tunneling with IPsec VPN
- PCI compliance reporting
- WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
- EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
- TKIP and AES encryption
- Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
- Cisco ISE integration for Guest access and BYOD Posturing
- Quality of Service
- Advanced Power Save (U-APSD)
- WMM Access Categories with DSCP and 802.1p support
- Layer 7 application traffic identification and shaping
- Mobility
- PMK, OKC, and 802.11r for fast Layer 2 roaming
- Distributed or centralized Layer 3 roaming
- Analytics
- Embedded location analytics reporting and device tracking
- Global L7 traffic analytics reporting per network, per device, & per application
- Warranty
- Lifetime hardware warranty with advanced replacement included
- Ordering Information
- MR52-HW Meraki MR52 Cloud Managed 802.11ac AP
- MA-PWR-30W-XX Meraki AC Adapter for MR Series (XX = US, EU, UK, or AU)
- MA-INJ-4-XX Cisco Meraki 802.3at PoE Injector (XX = US, EU, UK, or AU)
