901-R670-Z200 - Bộ phát Wi-Fi 7 trong nhà Ruckus R670
Ruckus R670 là bộ phát Wi-Fi 7 trong nhà, hỗ trợ ba băng tần 2.4GHz, 5GHz và 6GHz 2x2:2. R670 hỗ trợ các công nghệ Multi-Link-Operation (MLO), Preamble Puncturing, điều chế 4K QAM và kênh 320MHz mang đến hiệu suất cao với tốc độ Wifi có thể lên tới là 9,34 Gbps. Thiết bị hỗ trợ cổng Ethernet 5Gbps giúp loại bỏ nghẽn giữa kết nối dây và Wi-Fi. R670 đáp ứng nhu cầu của các môi trường như khách sạn, trường học, phòng họp. Là sự lựa chọn hoàn hảo cho các ứng dụng sử dụng nhiều dữ liệu như video 4K/8K hoặc nhạy cảm với độ trễ như Voice.
Thông số kỹ thuật
Model | R670 (901-R670-Z200) | ||
WI-FI | |||
Wi-Fi Standards | · IEEE 802/11a/b/g/n/ac/ax/be, Wi-Fi 7 | ||
Supported Rates | · 802.11ax: 4 to 4804 Mbps · 802.11ac: 6.5 to 866 Mbps · 802.11n: 6.5 to 300 Mbps · 802.11a/g: 6 to 54 Mbps · 802.11b: 1 to 11 Mbps · 802.11be: 4 to 5765 Mbps |
||
Supported Channels | · 2.4GHz: 1-13 · 5GHz: 36-64, 100-144, 149-165 · 6GHz: 1-233 |
||
MIMO | · 2x2 SU-MIMO in tri-band mode. 4x4(5GHz) in dual-band · 2x2 MU-MIMO in tri-band mode. 4x4(5GHz) in dual-band |
||
Spatial Streams | · 2 in tri-band mode or 4 in dual-band mode at 5GHz | ||
Radio Chains and Streams | · 2x2:2 in all 3 bands. 4x4:4(5GHz) in dual-band mode | ||
Channelization | · 20, 40, 80, 160, 320 MHz | ||
Security | · WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3, WPA3-SAE, OWE, PMF (802.11w), Dynamic PSK, DPSK3 · WIPS/WIDS. TPM 2.0, Secure Boot |
||
Other Wi-Fi Features | · WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v, MBO · MLO (Multi-link operation), Preamble Puncturing · Web Authentication and Guest Access · Hotspot, Hotspot 2.0 · Captive Portal · WISPr |
||
RF | |||
Antenna Type | · BeamFlex+ adaptive antennas with polarization diversity · Adaptive antenna that provides 4,000+ unique antenna patterns per band |
||
Antenna Gain (max) | · Up to 4dBi | ||
Peak Transmit Power (Tx port/ chain + Combining gain) |
· 2.4GHz: 26dBm · 6GHz: 25dBm · 5GHz: 25dBm(2x2). 28dBm(4x4) |
||
Frequency Bands | · ISM (2.4-2.484GHz) · U-NII-1 (5.15-5.25GHz) · U-NII-2A (5.25-5.35GHz) · U-NII-2C (5.47-5.725GHz) · U-NII-3 (5.725-5.85GHz) · U-NII-5 (5.925–6.425GHz) · U-NII-6 (6.425–6.525GHz) · U-NII-7 (6.525–6.875GHz) · U-NII-8 (6.875–7.125GHz) |
||
POWER CONSUMPTION | |||
Mode | DC Power | 802.3bt5 PoH, uPoE | 802.3at |
Power Consumption | · 36W | · 36W | · 25.5W |
System Configuration | · 5Gbps Ethernet Enabled · 1Gbps Ethernet Enabled · USB Enabled (3W) · IoT Enabled (selectable) |
· 5Gbps Ethernet Enabled · 1Gbps Ethernet Enabled · USB Enabled (3W) · IoT Enabled (selectable) |
· 5Gbps Ethernet Enabled · 1Gbps Ethernet Disabled · USB Disabled (0W) · IoT Disabled |
Wi-Fi Radios | · 2.4GHz (2x2) Tx 22dBm · 5GHz (2x2) Tx 22dBm · 6GHz (2x2) Tx 22dBm |
· 2.4GHz (2x2) Tx 22dBm · 5GHz (2x2) Tx 22dBm · 6Ghz (2x2) Tx 22dBm |
· 2.4GHz (2x2) Tx 17dBm · 5GHz (2x2) Tx 17dBm · 6Ghz (2x2) Tx 17dBm |
PERFORMANCE AND CAPACITY | |||
Peak PHY Rates | · 2.4GHz: 689 Mbps · 5GHz: 5765 Mbps (4x4:4) or 2882 Mbps (2x2:2) · 6GHz: 5765 Mbps |
||
Client Capacity | · Up to 768 clients per AP | ||
SSID | · Up to 36 per AP | ||
RUCKUS RADIO MANAGEMENT | |||
Antenna Optimization | · BeamFlex+ · Polarization Diversity with Maximal Ratio Combining (PDMRC) |
||
Wi-Fi Channel Management | · ChannelFly · Background Scan Based |
||
Client Density Management | · Adaptive Band Balancing · Client Load Balancing · Airtime Fairness · Airtime-based WLAN Prioritization |
||
SmartCast Quality of Service | · QoS-based scheduling, QoS Mirroring · Directed Multicast · L2/L3/L4 ACLs |
||
Mobility | · SmartRoam | ||
Diagnostic Tools | · Spectrum Analysis · SpeedFlex |
||
NETWORKING | |||
Controller Platform Support | · SmartZone · RUCKUS Unleashed · RUCKUS One |
||
Mesh | · SmartMesh™ wireless meshing technology. Self-healing Mesh in 2.4 GHz, 5GHz, and 6GHz | ||
IP | · IPv4, IPv6, dual-stack | ||
VLAN | · 802.1Q (1 per BSSID or dynamic per user based on RADIUS) · VLAN Pooling · Port-based |
||
802.1x | · Authenticator & Supplicant | ||
Tunnel | · GRE, Soft-GRE | ||
Policy Management Tools | · Application Recognition and Control · Access Control Lists · Device Fingerprinting · Rate Limiting · URL Filtering |
||
IoT Onboard | · Integrated BLE or Zigbee (one IoT radio) · Matter & Thread capable |
||
PHYSICAL INTERFACES | |||
Ethernet | · One 100M/1/2.5/5GbE (PoE) port and one 10M/100M/1GbE port · Power over Ethernet (802.3af/at/bt) with Category 5e (or better) cable · LLDP support |
||
USB | · 1 USB 2.0 port, Type A | ||
DC Power | · 48V DC Power Jack | ||
PHYSICAL CHARACTERISTICS | |||
Physical Size | · 22cm (L), 22cm (W), 4.9cm (H) | ||
Weight | · 1.02kg | ||
Mounting | · Wall, acoustic ceiling, desk · Bracket (902-0120-0000) |
||
Physical Security | · Secure bracket (sold separately) (902-0120-0000) | ||
Operating Temperature | · 0ºC to 50ºC | ||
Operating Humidity | · Up to 95%, non-condensing |
901-R670-Z200 : RUCKUS R670 Wi-Fi 7 tri-band concurrent wireless Access Point with 2x2:2 (2.4GHz) + 2x2:2 (5GHz) + 2x2:2 (6GHz). Wi-Fi 7 in all three bands. 6GHz LPI mode and SP mode support with AFC. Software configurable to 2x2 (2.4GHz) + 4x4 (5GHz) dual-band mode. BeamFlex+, one 5/2.5/1- Gigabit Ethernet backhaul, one 1-Gigabit port, PoH/uPoE/802.3bt PoE support, onboard BLE and Zigbee selectable IoT radio, USB 2.0, TPM 2.0, and Secure Boot. Adjustable acoustic drop ceiling bracket included. Power adapter not included.
Data sheet RUCKUS® R670 Indoor Wi-Fi 7 (802.11be) Access Point with 9.34 Gbps Data Rate
901-R760-Z200 - Ruckus R760 Ultra High Performance Wi-Fi 6E...
Liên hệ để có giá tốt
901-R560-Z200 - Ruckus R560 High-Performance Tri-Radio Wi-Fi...
Liên hệ để có giá tốt
901-R770-Z200 - Ruckus R770 Tri-Radio Wi-Fi 7 Indoor Access...
Liên hệ để có giá tốt