Thiết bị không dây Indoor Wireless Access Point Fortinet FortiAP 231F (FAP-231F)
Mã sản phẩm | FAP-231F |
Hardware | |
Hardware Type | Indoor AP |
Number of Radios | 3 + 1 BLE |
Number of Antennas | 3 Dual band Internal Wi-Fi + 1 BLE/ZigBee |
Antenna Type and Peak Gain | - PIFA antenna - Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz - BLE antenna 4.0dBi at 2.4GHz band |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities | - Frequency band: 2.4GHz - Channel width: 20/40MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service |
Radio 2 Capabilities | - Frequency band: 5.0GHz - Channel width: 20/40/80MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service |
Radio 3 Capabilities | - Frequency bands: 2.4GHz and 5.0GHz - MIMO Chains: 1x1 Frequency Scannin |
Maximum Data Rate | - Radio 1: up to 574 Mbps - Radio 2: up to 1201 Mbps - Radio 3: Frequency scanning only |
Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
Interfaces | - 2x 10/100/1000 Base-T RJ45 - 1x Type 2.0 USB - 1x RS-232 RJ45 Serial Por |
Power over Ethernet (PoE) | - 1 x 802.3at PoE default - 1 x 802.af PoE no USB function |
Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP , Web Captive Portal , MAC blocklist & allowlist |
Maximum Tx Powerr (Conducted) | - Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) - Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) - Radio 3: NA |
IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
SSID Types Supported | Local-Bridge, Mesh, & Tunnel |
Per Radio Client Capacity | Up to 512 clients per radio (Radio 1 and Radio 2) |
Cellular Co-existence | ✔ |
Reset Button | ✔ |
LED Off Mode | ✔ |
Advanced 802.11 Features | |
OFDMA | ✔ |
Spatial Reuse (BSS Coloring) | ✔ |
UL MU-MIMO 802.11ax mode | ✔ |
DL-MU-MIMO | ✔ |
Enhanced Target Wake Time (TWT | ✔ |
ZeroWait DFS/Agile DFS | ✖ |
Wireless Monitoring Capabilities | |
Rogue Scan Radio Modes | Background, Dedicated |
WIPS / WIDS Radio Modes | Background, Dedicated (recommended) |
Packet Sniffer Mode | ✔ |
Spectrum Analyzer | ✔ |
Dimensions | |
Length x Width x Height | 6.0 x 6.0 x 2.86 inches (153.2 x 153.2 x 53.0 mm) |
Weight | 1.0 lbs (0.543 kg) |
Mounting Options | Ceiling, T-Rail, and Wall |
Included Accessories | Standard Mount kit for Ceiling, T-Rail, and Wall |
Environment | |
Power Supply | 802.3at PoE SP-FAP200-PA-XX or GPI-130 |
Power Consumption (Maximum) | 17 W |
Humidity | 5–90% non-condensing |
Operating / Storage Temperature | 32–122°F (0 - 50°C) / -22–158°F (-30–70°C) |
Directives | Low Voltage Directive • RoHS |
UL2043 Plenum Material | ✖ |
Mean Time Between Failures | >10 Years |
IP Rating | N/A |
Surge Protection Built In | ✔ |
Hit-less PoE Failover | N/A |
Certifications | |
WiFi Alliance Certified | No |
DFS | CE |
SKU | Description |
FC-10-PF231-247-02-DD | 24x7 FortiCare Contract |
SP-FAP200-PA | AC Power Adapter for FAP-231F |
- FAP-231F Indoor Wireless AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 ), internal antennas, 2x 10/100/1000 RJ45 port, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included.For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP200-PA.
- FC-10-PF231-247-02-DD - 24x7 FortiCare Contract
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt