CW9162I-MR Cisco Catalyst 9162I AP (W6E, tri-band 2x2) w/Meraki

Meraki CW9162I-MR

Bộ phát Wifi CW9162I-MR Cisco Catalyst 9162I AP (W6E, tri-band 2x2) w/Meraki

Giao diện: 1 × 2.5G mGigabit Ethernet port (RJ45)
Nguồn: 802.3at/bt PoE+ and UPoE hoặc 12V DC input
Hoạt động trên 3 băng tần 2.4GHz, 5GHz và 6 GHz
Tốc độ tối đa 3.9 Gbps
License Meraki Cloud tùy chọn: ENT 1Yr, 2Yr, 3Yr hoặc ADV 1Yr, 2Yr, 3Yr

Giá bán : Liên hệ để có giá tốt

Tình trạng : Còn hàng

Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
- 5 GHz 802.11a/n/ac/ax client access radio
- 6 GHz 802.11ax client access radio
- 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
- 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios
Antenna
- Integrated omni-directional antennas
  - 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  - 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
  - 6 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabilities
- UL/DL-OFDMA
- Target Wait Time (TWT)
- BSS coloring
- SU-MIMO and DL MU-MIMO support
- Maximal ratio combining (MRC)
- 802.11ax beamforming
- 20 and 40 MHz* channels (802.11n)
- 20, 40*, 80 MHz channels (802.11ac Wave 2)
- 20, 40*, 80 and 160MHz channels (802.11ax)
- Up to 1024-QAM on both 2.4 GHz, 5 GHz and 6 GHz bands
- Packet aggregation - A-MPDU (transmit and receive), A-MSDU (transmit and receive)
Power
- Power over Ethernet: 37 - 42.5 V (802.3at compliant)
- DC Power Adapter (12V)
- Power consumption: Up to 30W
- Minimum power requirement: 30W (802.3at complaint)
- Power over Ethernet injector and DC adapter sold separately
Interfaces
- 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
- 1x DC power connector (5.5 mm x 2.5 mm, center positive)
- USB 2.0 at 4.5W (with 802.3at power)
- Console - Only available in DNA Mode
Mounting
- All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
- Desktop, ceiling, and wall mount capable
- Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
Physical Security
- Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
- Kensington lock
Environment
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
- Operating temperature: 32° to 122°F (0° to 50°C)
- Operating humidity: 10% to 90% (non-condensing)
- Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
Reliability
- Mean Time Between Failure (MTBF):
  - 2,370,107 hrs at 77°F (25°C) operating temperature
  - 991,862 hrs at 113°F (45°C) operating temperature
Physical Dimensions
- 7.8 x 7.8 x 1.7 in. (200 x 200 x 44.45 mm)
- Weight: 2.05 lb. (0.93 kg)

Security
- Integrated Layer 7 firewall with mobile device policy management
- Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
- Flexible guest access with device isolation
- VLAN tagging (802.1Q) and tunneling with IPSec VPN
- PCI compliance reporting
- WPA2-PSK, WPA2-Enterprise, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)
- EAP Local Authentication - EAP-TTLS/PAP/ PEAP-GTC, EAP-TLS
- AES encryption
- Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
- Cisco ISE integration for guest access and BYOD posturing
Quality of Service
- Advanced Power Save (U-APSD)
- WMM Access Categories with DSCP and 802.1p support
- Layer 7 application traffic identification and shaping
Mobility
- PMK, OKC, and 802.11r for fast Layer 2 roaming
- Distributed or centralized Layer 3 roaming
Analytics
- Embedded location analytics reporting and device tracking
- Global L7 traffic analytics reporting per network, per device, and per application
LED Indicators
- One power/booting/firmware upgrade status
Regulatory
- RoHS
- For additional country-specific regulatory information, please contact Meraki sales
Warranty
- Indoor access point
- Lifetime hardware warranty with advanced replacement included
Ordering Information
- CW9162I-MR: Catalyst CW9162I Cloud Managed 802.11ax Compatible AP
- MA-PWR-30W-XX: Meraki AC Adapter for MR Series
- MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
- Cisco AIR-PWRINJ-6 802.3at
- Cisco AIR-PWRINJ-7 802.3bt
- Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
- Meraki access point license required

Model	CW9162
Usage	General purpose Wi-FI 6E AP
Radio specification	Tri-band (2.4 GHz, 5 GHz, & 6 GHz)
Spatial streams	Two 2x2 MU-MIMO
WIDS/WIPS	Tri-band
Bluetooth Low Energy/IoT Radio	✓
Aggregate frame rate	3.9 Gbps
Interface	One multigigabit 2.5G
USB 2.0	4.5W
Management	Cloud-managed with Meraki cloud; Managed on premises with Cisco DNA Center
PoE	802.3at/bt PoE+ and UPoE compliant or DC power adapter
Performance features	UL/DL-OFDMA, TWT support, BSS coloring SU-MIMO, UL/DL MU-MIMO support Maximal ratio combining (MRC) and beamforming 20 and 40 MHz channels (802.11n); 20, 40, 80 MHz channels (802.11ac wave 2); 20, 40, 80, and 160 MHz channels (802.11ax) Up to 1024-QAM on all three: 2.4 GHz, 5 GHz, and 6 GHz bands Packet aggregation
Dimensions	7.8 in x 7.8 in x 1.7 in (200mm x 200mm x 43mm)
Weight	2.05 lb (0.93 kg)

License	Description
Meraki Enterprise License
LIC-ENT-1YR	Cisco Meraki MR Enterprise License and Support, 1 Year
LIC-ENT-3YR	Cisco Meraki MR Enterprise License and Support, 3 Years
LIC-ENT-5YR	Cisco Meraki MR Enterprise License and Support, 5 Years
Meraki Advanced License
LIC-MR-ADV-1Y	Cisco Meraki MR Advanced License and Support, 1 Year
LIC-MR-ADV-3Y	Cisco Meraki MR Advanced License and Support, 3 Years
LIC-MR-ADV-5Y	Cisco Meraki MR Advanced License and Support, 5 Years

Danh mục

Hàng stock

Meraki CW9162I-MR

Sản phẩm liên quan

Hỗ trợ trực tuyến

Tư vấn

Kinh doanh

Kỹ thuật