Danh mục

Product Code	Cisco ASR1006=
Physical specifications Note: Depth applies to chassis edgeto-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details.	Height: 10.5 in. (266.7 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm) Weight: 98.70 lb (44.77 kg) (with dual AC power supply, SPA, route processor, two Cisco ASR 1000 Series 10- Gbps ESPs [ASR1000 -ESP10] or ASR 1000 Series 40- Gbps ESPs [ASR1000 -ESP-40] or ASR1000 Series 100-Gbps ESPs [ASR1000 -ESP100], two Cisco ASR 1000 Series RP1s [ASR1000 -RP1], three Cisco ASR 1000 Series 10- Gbps SIPs [ASR1000 -SIP10] or ASR1000 Series 40- Gbps SIPs [ASR1000 -SIP-40], and no SPAs)
Default memory	4-GB DRAM RP1 8-GB DRAM RP2
Number of SIPs or Ethernet line cards supported	3
Shared port adapters	12 SPA slots
Ethernet port adapters	N/A
Cisco ASR 1000 Series ESP	2 ESP slots
Route processor	2 routeprocessor slots
Redundancy	Hardware: Yes
Built-in Gigabit Ethernet ports	0
Built-in 10 Gigabit Ethernet port	No
Network interface module	No
Processor Module
ESP support	Cisco ASR 1000 Series 10-Gbps ESP (ASR1000- ESP10) noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000- ESP10-N) Cisco ASR 1000 Series 20-Gbps ESP (ASR1000- ESP20) Cisco ASR 1000 Series 40-Gbps ESP (ASR1000- ESP40) Cisco ASR 1000 Series 100- Gbps ESP (ASR1000- ESP100)
ESP bandwidth	10 to 100 Gbps
ESP memory	Cisco ASR 1000 Series 10-Gbps ESP (ASR1000- ESP10) ASR 1000 Series 10- Gbps ESP (ASR1000- ESP10): 2-GB DRAM default; 2-GB DRAM maximum Cisco ASR 1000 Series 20-Gbps ESP (ASR1000- ESP20): 4-GB DRAM default; 4-GB DRAM maximum Cisco ASR 1000 Series 40-Gbps ESP (ASR1000- ESP40): 8-GB DRAM Cisco ASR 1000 Series 100- Gbps ESP (ASR1000- ESP100): 16-GB DRAM
SIPs and Ethernet line cards	Supports Cisco ASR 1000 Series 10- Gbps SIP Carrier Card (ASR1000- SIP10) Cisco ASR 1000 Series 40- Gbps SIP Carrier Card (ASR1000- SIP40) ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE line cards (ASR1000- 2T+20X1GE); and six 10 GE line cards (ASR1000- 6TGE)
Embedded hardware-based encryption (highest throughput numbers are for 1400B packets)	Yes: Cisco ASR 1000 Series 10- Gbps ESP (ASR1000- ESP10) with up to 4 Gbps crypto support throughput Cisco ASR 1000 Series 20-Gbps ESP (ASR1000- ESP20) with up to 8-Gbps crypto support throughput Cisco ASR 1000 Series 40-Gbps ESP (ASR1000- ESP40) with up to 11-Gbps crypto support throughput Cisco ASR 1000 Series 100- Gbps ESP (ASR1000- ESP100) with up to 29-Gbps crypto support throughput Note: No support on noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000- ESP10-N)
Minimum Cisco IOS XE Software release	ASR 1000 Series 40-Gbps ESP (ASR1000- ESP40) requires Cisco IOS XE Software Release 3.1.0S Note: Cisco ASR 1000 Series 100-Gbps ESP (ASR1000- ESP100) requires Cisco IOS XE Software Release 3.7.0S.
Rack-mounting	Yes: 19-inch
External USB flash memory	1-GB USB flash-memory support
Redundant power supply	Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of AC and DC power supplies is not supported.
Power input	Worldwide ranging AC (85to 264V; 120 or 240V; 60or 50Hz nominal) Worldwide ranging DC (-40.5 to -72: -48V nominal)
Power consumption	● Maximum (DC): 1700W ● Maximum (AC): 1600W ● Maximum (out): 1275W or ● Maximum (DC): 2100W ● Maximum (AC-high line): 2000W ● Maximum (out): 1695W
Airflow	Front-to-back
Operating temperature (nominal)	32 to 104°F (0 to 40°C)
Operating temperature (short-term)	32 to 122°F (0 to 50°C)
Operating humidity (nominal) (relative humidity)	10 to 85%
Operating humidity (short-term)	5 to 90%
Storage temperature	-40 to 150°F (-40 to 70°C)
Storage humidity (relative humidity)	5 to 95%
Operating altitude	-500 to 10,000 feet (152 to 3048 meters)
Network Equipment Building Standards (NEBS)	GR-1089 and GR-63 (in progress)