Thiết bị lưu trữ mở rộng QNAP EJ1600v2
SKU# | EJ1600 v2 |
Form Factor | 3U rackmount |
Host Interface | 3 SAS (one input, one output, one reserved) 12Gbps for each controller, 4x port |
LED Indicators | System Power LED (Blue): on/off System Status (Green/ Red): in operation, system errors, low power, disk lost, disk failure, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection |
Buttons | Power / Reset |
Dimensions (HxWxD) | 132 × 446.2 × 618m |
Weight | 24.11 kg |
Max. number of HDDs/SSDs supported | 16 |
Hard Drive Type | 3.5" SAS12/6Gb/s, hard drive or 2.5" SAS SSD |
Operating temperature | 0 - 40 °C (32°F - 104°F) |
Storage Temperature | -20 - 70°C (-4°F - 158°F) |
Relative Humidity | 5~95% RH non-condensing, wet bulb: 27˚C |
Power Supply Unit | Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac~, 50-60Hz |
Power Consumption: Operating Mode, Typical | 344.19 W |
Fan | Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3) |
Management | The functions listed below are managed via the QNAP QES operating system. Support for hard disk’s S.M.A.R.T. capacity RAID expansion enclosure LED identifier Location indication of RAID expansion enclosure Location indication of hard disks on RAID expansion enclosure Smart fan control In-band firmware update The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system. Upto 1PB Single Volume Support for multiple RAID groups in a storage pool to ensure data safety Online storage pool expansion Online volume expansion Block-based iSCSI LUN Support for thin-provisioned volume with space reclamation Support for thin-provisioned iSCSI LUN with space reclamation |
Liên hệ để có giá tốt