Danh mục

Description	48-port, UPOE Multigigabit Ethernet Module with: 24 ports (Ports 1 to 24) 1G POE/POE+/UPOE 24 ports (Ports 25 to 48) Multigigabit (mGig) POE/POE+/UPOE Hardware ready for IEEE 1588/802.1as— A Precision Time Protocol (PTP) used for time synchronization across the network for video and audio applications. Supports Cisco Phone Discovery and IEEE802.3af and IEEE802.3at. Supports Energy Efficient Ethernet (EEE) Supports PoE Cable Loss Management Saves power with direct power delivery from backplane Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID technology and requires an RFID reader with compatible software. It provides auto-identification capabilities for asset management and tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant. They operate in the 860- to 960-MHz UHF band. For more information, see Radio Frequency Identification (RFID on Cisco Catalyst 9000 Family Switches). The following switching module features are configured in software. See the software configuration guide for more information: Provides per port power consumption measurement Enables you to specify maximum power consumption on every port Supports PoE Power Configuration with up to 60W power per port on each of its 48 ports.
Per Slot Bandwidth	Per slot bandwidth depends on the supervisor module: 80 Gbps with C9400-SUP-1XL ten-slot chassis or C9400-SUP-1. 120 Gbps with C9400-SUP-1XL seven-slot chassis.
Minimum / Maximum Port Density³	Catalyst 9407R Switch—48 / 96 Catalyst 9407R Switch—48 / 240 Catalyst 9410R Switch—48 / 384
Support and Restrictions	Can be installed in any non-supervisor module slot. Ensure that the chassis power supply configuration supports the PoE budget adequately. Use the Cisco Power Calculator for power budgeting estimates and to determine power supply requirements for a specific PoE configuration.

Features

● 48 ports with 24 Multigigabit ports and 24 10/100/1000 Mbps ports

● Speeds of 100/1000 Mbps, 2.5/5 Gbps, and 10GBASE-T on the Multigigabit ports and 10/100/1000 Mbps on the other ports

● Nonblocking up to 1000 Mbps on all ports

● RJ-45 interface on all ports

● Supported on Cisco IOS^® XE Software Release 16.6.2 or later

● Cisco UPOE: Capable of up to 60W on all ports in the line card

● Energy Efficient Ethernet 802.3az on all 10/100/1000 ports

● IEEE 802.3bz, 802.3an Multigigabit Ethernet standard on the Multigigabit ports

● IEEE 802.3af/at and Cisco prestandard PoE

● IEEE 802.1ae (MACsec-256) capability in hardware

● Layer 2 to Layer 4 Jumbo Frame support (up to 9198 bytes)

● Enterprise and commercial: Designed to power next-generation IP phones, wireless access points, wireless base stations, video cameras, virtual desktop clients, and other PoE/Cisco UPOE devices

● Support for campus and branch applications requiring enhanced performance for large file transfers and network backups

Data sheet Cisco Catalyst 9400 Series Switch Line Cards