Mã sản phẩm
|
MS390-48UX2-HW
|
Interface |
- 48 × 100/1/2.5/5/10G Ethernet (RJ45)
- 4/8 × 10G SFP+ uplink modules
- 2 × 40G QSFP uplink modules
- Auto-negotiation and crossover detection
- 2 × dedicated stacking ports
|
Switching Capacity |
640 Gbps |
Stacking Bandwidth |
480 Gbps |
Forwarding rate |
476.19 Mpps |
Physical Dimensions (H x W x D) |
1.73” x 17.5” x 22.2” (4.4 x 44.5 x 56.4 cm) |
Weight |
20.05 lb (9.09 kg) |
Mount Type |
1U Rack Mount |
Hot Swap Fans |
Yes, 3x |
Operating Temperature |
-5°C to 45°C |
Humidity |
5 to 90% |
Idle / Full Load Power |
157.9 / 843.8 W |
Available PoE W/ Primary PS |
645W |
Available PoE W/ Secondary PS |
1745W |
Hot Swap Power Supply |
Yes, Dual |
Management |
- Managed via Cisco Meraki Dashboard
- Zero-touch remote provisioning (no staging needed)
- Integrated with Meraki wireless and complete portfolio of IT products and solutions
- Basic configuration capability via local management page
- Detailed historical per-port and per-client usage statistics
- Operating System, device, and hostname fingerprinting
- SNMP and SYSLOG support for integration with other network management solutions
- Automatic firmware upgrades with scheduling control |
Remote Diagnostics |
- Email, SMS and Mobile push notification alerts 1
- Ping, traceroute, cable testing, and link failure detection with alerting
- Remote packet capture
- Dynamic and interactive network discovery and topology
- Combined event and configuration change logs with instant search |
Stacking |
- Physically stack up to 8 switches with 480 Gbps of stacking bandwidth on all models
- Virtual Stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration
- Faster convergence
- StackPower |
Ethernet Switching Capabilities |
- 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping)
- 802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)
- Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST)
- STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD
- Broadcast storm control
- 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)
- 802.3ad Link aggregation with up to 8 ports per aggregate, Multichassis aggregates supported on stacked switches
- Port mirroring
- IGMP snooping for multicast filtering
- MAC forwarding entries: 32K |
Layer 3 |
- Static routing, OSFPv2
- Multicast routing
- Warm Spare (VRRP) 2
- DHCP Relay, DHCP Server |
Security |
- Integrated multi-factor authentication for Dashboard management
- Role-based access control (RBAC) with granular device and configuration control
- Corporate wide password policy enforcement
- IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing
- Single-Host/Multi-Domain/Multi-Host/Multi Authentication
- Port security: Sticky MAC, MAC whitelisting
- DHCP snooping, detection and blocking, Dynamic ARP Inspection
- IPv4 and IPv6 ACLs
- Secure Connect
- Adaptive Policy |
MTBF (at 25°C) |
198,647 |
Warranty |
Full lifetime hardware warranty with next-day advanced replacement included |
Regulatory |
FCC Part 15 (CFR 47) Class A, ICES-003 Class A, CISPR22 Class A, CNS13438, EN 300 386 V1.6.1, EN 55022 Class A, EN 61000-3-2, EN61000-3-3, KN 32, TCVN 7189 Class A, EN 55032 , CISPR 32 Class A, V-2/2015.04, V-3/2015.04, VCCI-CISPR 32 Class A, CISPR24, EN 300 386 V1.6.1, EN 55024, KN35, TCVN 7317 |
Safety Compliance |
CAN/CSA-C22.2 No. 60950-1, UL 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1 |