| Model |
TEW-740APBO2K |
| Hardware Interface |
- 1 x 10/100 Mbps LAN1 port (proprietary PoE max. cable length 60 m (197 ft.))
- 1 x 10/100 Mbps LAN2 port
- LED indicators
- Reset button
- Grounding Point
|
| Special Features |
- IPX6 weather rated
- 802.1Q VLAN assignment per SSID
- Schedule radio on/off time policy
- 802.11r / 802.11k fast roaming
- Preconfigured point-to-point bridge kit
|
| Access Control |
- Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X
- Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
- Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
- 802.1Q VLAN
- Authentication 2.0 / Walled Garden for guest authentication
- Customizable captive portal for guest authentication
- WMM
|
| Operation Modes |
- Access Point (AP)
- Access Point (AP) + WDS
- Wireless Distribution System (WDS)
- WISP (CPE) + AP
- Client Bridge + AP
- Router
- Control AP (CAP)
|
| SSID |
|
| Internet Connection Types (WISP (CPE) + AP & Router modes) |
- Dynamic IP (DHCP)
- Static IP (Fixed)
- PPPoE (Dynamic IP/Static IP)
- PPTP (Dynamic IP/Static IP)
|
| Management/Monitoring |
- Local/remote web based management (HTTP, HTTPS)
- Local/remote CLI based management (Telnet, SSH)
- SNMP v2c/v3
- SNMP Trap
- Upgrade firmware
- Backup/restore configuration
- Event logging
- Authentication log
- Reboot
- Restore to factory defaults
- Ping test
- Traceroute
- LED Control
|
| Frequency |
- FCC: 2.412 - 2.462 GHz
- ETSI: 2.412 – 2.472 GHz
- IC: 2.412 - 2.462 GHz
|
| Wireless Channels |
|
| Modulation |
- 802.11b: DBPK, DQPSK, CCK with DSSS
- 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
|
| Media Access Protocol |
|
| Antenna Gain |
- 10 dBi internal sector antenna
|
| Wireless Output Power/Receiving Sensitivity |
- 802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.4 dBm (max.), IC: 28 dBm (max.)/-88 dBm (typical) @ 11 Mbps
- 802.11g: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.5 dBm (max.), IC: 26 dBm (max.)/- 74 dBm (typical) @ 54 Mbps
- 802.11n: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.6 dBm (max.), IC: 26 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
|
| Power |
- Input: 100 – 220 V, 50 - 60 Hz, 0.5 A
- Output: 12V / 1A
- Consumption: 13.5 Watts Max.
|
| Operating Temperature |
- -20 - 60° C (-4 - 140° F)
|
| Operating Humidity |
|
| Certifications |
|
| Dimensions |
- 195 x 118 x 61 mm (7.6 x 4.6 x 2.4 in.) per access point
|
| Weight |
- 320 g (0.7 lbs.) per access point
|
