Danh mục

Model	AP-605H (S0B60A)
Wi-Fi radio specifications	• AP type: Indoor, tri band, 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO • 2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20) • 5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices • 6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices • Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6GHz radio)
Wi-Fi antennas	• Integrated omni-directional antennas for 2x2 MIMO with peak antenna gain of 5.1dBi in 2.4GHz, 5.1dBi in 5GHz and 5.4dBi in 6GHz. The built-in antennas are optimized for vertical wall or desk mounted orientation of the AP.
Other interfaces and features	• Uplink (E0): Ethernet wired network port (RJ-45) ₀ Auto-sensing link speed (100/1000/2500BASE-T) and MDI/ MDX ₀ 2.5Gbps speed complies with NBase-T and 802.3bz specifications ₀ 802.3az Energy Efficient Ethernet (EEE) ₀ POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3, 4 or 6) • Downlink (E1-E4): Ethernet wired network ports (RJ-45) ₀ Auto-sensing link speed (10/100/1000BASE-T) and MDI/ MDX ₀ 802.3az Energy Efficient Ethernet (EEE) ₀ E1&E2: POE PSE: 802.3af/at POE output; dual 802.3af (both ports) or single 802.3at (E1 only); 30W max • DC power interface ₀ Circular: 48Vdc (nominal, +/ 5%), accepts 1.35mm/3.5mm center positive circular plug with 9.5mm length • USB 2.0 host interface (Type A connector) ₀ Capable of sourcing up to 1A / 5W to an attached device USB device can be physically secured with locking screw • Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio ₀ BLE: up to 3dBm transmit power (class 1) and 98dBm receive sensitivity (125kbps) ₀ Zigbee: up to 3dBm transmit power and 96dBm receive sensitivity (250kbps) Integrated omni-directional antenna with roughly 30 to 40 degrees down tilt and peak gain of 3.5dBi
Power sources and power consumption	• The AP supports direct DC power and Power over Ethernet • When both DC and POE power sources are available, DC power takes priority over POE • When powered by DC or 802.3bt (class 6) POE, the AP will operate without restrictions • When powered by 802.3at (class 4) POE and with the IPM feature disabled, the AP will disable the USB port (only) if POE-PSE is enabled, and support (802.3af) POE-PSE power on E1 only (no PSE on E2) • When powered by 802.3af (class 3) POE with the IPM feature disabled, the AP will disable the USB port and POE-PSE capability. With IPM enabled, the AP will start up without restrictions, but may dynamically apply additional restrictions depending on the POE budget and actual power consumption. The feature specific restrictions and order in which they are applied can be configured. • Maximum (worst-case) power consumption (AP only / USB adder / POE PSE adder): ₀ DC powered: 14.9W / 5.8W / 27.5W ₀ POE powered: 13.9W / 5.8W / 30.1W • Maximum (worst-case) power consumption in idle mode (AP only): ₀ DC powered: 5.8W ₀ POE powered: 5.9W • Maximum (worst-case) power consumption in deep-sleep mode (AP only): ₀ DC powered: 1.5W ₀ POE powered: 1.4W
Mechanical specifications	Dimensions/weight (AP-605H; unit): ₀ 105mm (W) x 40 mm (D) x 153 mm (H) ₀ 500g Dimensions/weight (AP-605H; shipping): ₀ 145 mm (W) x 64 mm (D) x 210 mm (H) ₀ 690 g
Environmental specifications	• Operating conditions ₀ Temperature: 0C to +40C ₀ Relative humidity: 5% to 95% ₀ ETS 300 019 class 3.2 environments ₀ AP is plenum rated for use in air-handling spaces • Storage conditions ₀ Temperature: -25C to +55C ₀ Relative humidity: 10% to 100% ₀ ETS 300 019 class 1.2 environments • Transportation conditions ₀ Temperature: -40C to +70C ₀ Relative humidity: up to 95% ₀ ETS 300 019 class 2.3 environments