Danh mục

C1100TG-1N32A Cisco 1100 Terminal Services Gateway w/ 32 Async, 1 NIM (support for 2 GB DRAM) ● 32 x RS-232 asynchronous ports ● Optional 16 x RS-232 asynchronous ports ● 24 x Layer 2 switch ports ● 1 NIM module (supports selected Cisco 4000 Series Integrated Services Router modules)

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị mạng Router Cisco C1100TG-1N32A

Model	C1100TG-1N32A
Aggregate throughput (Cisco Express Forwarding)	500 Mbps
Aggregate throughput (IPsec)	100 Mbps
Total onboard WAN or LAN 10/100/1000 ports	2 WAN (GE/SFP)
RJ45-based ports	2 WAN (GE/SFP)
SFP-based ports	2
NIM slots	1
Daughter card	1x 16-port
OIR (all I/O modules)	Yes for NIMs
Default memory DRAM	2 GB DDR4
Default flash memory	4 GB
External USB 3.0/2.0 slots	1 / 1
Power-supply options	Internal AC or DC support
High availability for power supply	External AC only
AC input voltage	100 to 240V AC autoranging
DC input voltage
Input voltage	48 to 60V
Input current	4.2A
HVDC power supply unit
Input voltage	180 to 240V
Input current	0.9A
AC input frequency	50 to 60 Hz
AC input current, AC power supply	1.6A
AC input surge current	1.2/50 us, 1kV L-N/2kV L-PE and N-PE
Typical power (no modules)	30W
Maximum power with AC power supply	80W (no PoE)
Maximum power with DC power supply	80W (no PoE)
Dimensions (H x W x D)	1.73 x 17.5 x 12 in. (44 x 444 x 305 mm)
External power supply dimensions (H x W x D)	2.9 x 1.2 x 6.1 in. (75 x 30 x 155 mm)
Rack height	1 rack unit
Packaging weight	14.0 lb (6.35 kg)
Airflow	I/O side to fan side
Mean Time Between Failures (MTBF) (hours) at 25°C	739 252 hours
Temperature	32° to 104°F (0° to 40°C)
Architectural highlights
Multicore processors	High-performance multicore processors support high-speed WAN connections. The data plane uses an emulated flow processor (FP) that delivers application-specific integrated circuit (ASIC)-like performance that does not degrade as services are added.
Serial port data rates	1200, 2400, 4800, 9600 (default), 19,200, 38,400, 57,600, 115,200, and 230,000 bps Parity: None, even, or odd parity Bit support: 8-bit characters. 1 start bit, 1 stop bit
Integrated Gigabit Ethernet ports	Provides up to two built-in 10/100/1000 Ethernet ports for WAN or LAN. The 10/100/1000 Ethernet ports can support SFP-based connectivity in addition to RJ45 connections, enabling fiber or copper connectivity.
Optional High Availability power supply	High availability for power is achieved by using an optional external AC power supply to reduce network downtime and protect the network from power failures. Both power supplies may be connected to the mains. Upon failure of the internal power supply, the external (AC only) power supply automatically takes over.
Serial protocol support	Point-to-Point Protocol (PPP), Password Authentication Protocol (PAP), and Challenge Handshake Authentication Protocol (CHAP), Serial Line Internet Protocol (SLIP), X.25/ X.25 over TCP (XOT), Layer 2 Tunneling Protocol (L2TP) v3, L2TP Network Server (LNS)
Control and flow signals	Control signals: Clear to Send (CTS), Request to Send (RTS), Data Terminal Ready (DTR), Data Carrier Detect (DCD) Flow control: XON/XOFF (software), CTS/RTS (hardware)
Cisco network interface modules (NIMs)	A single integrated NIM slot allows for flexible configurations. Refer to Table 4 for supported NIM modules. The NIM slot offers high-data-throughput capability to the route processor and to the asynchronous interfaces, switch ports. NIMs support OIR
Flash memory support	Fixed flash memory with support for 4-GB flash; 8-GB flash for the TGX model. USB Type A 3.0 port (rear side) provides capabilities for storage USB Type A 2.0 port (front side) provide capabilities for USB dongle.
DRAM (DDR4)	The default control-plane memory is 4 GB, DRAM and flash memory are provided as fixed configuration and are not field replaceable or upgradable.
Async cable bracket	One, included with the C1100 TSG for up to 48 ports (32 onboard + 16 on the daughter card)
LED support (on chassis)	6 Async Status, 1 System Status
Console/Aux and Ground	1 Console and 1 Aux port; 1 ground connection (all on the rear panel)
Fan support	3 fans on the rear panel (for C1100TG-1N24P32A). Fans are not field replaceable. 2 fans on the rear panel (for C1100TG-1N32A). Fans are not field replaceable.