HOTLINE
0909648899 028 62578355
Thiết bị mạng Router Cisco C1100TG-1N24P32A
| Model | C1100TG-1N24P32A |
| Aggregate throughput (Cisco Express Forwarding) | 500 Mbps |
| Aggregate throughput (IPsec) | 100 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 2 WAN (GE/SFP) + 24 LAN |
| RJ45-based ports | 2 WAN (GE/SFP) + 24 LAN |
| SFP-based ports | 2 |
| NIM slots | 1 |
| Daughter card | 1x 16-port |
| OIR (all I/O modules) | Yes for NIMs |
| Default memory DRAM | 4 GB DDR4 |
| Default flash memory | 4 GB |
| External USB 3.0/2.0 slots | 1 / 1 |
| Power-supply options | Internal AC or DC support |
| High availability for power supply | External AC only |
| AC input voltage | 100 to 240V AC autoranging |
| DC input voltage | |
| Input voltage | 48 to 60V |
| Input current | 4.2A |
| HVDC power supply unit | |
| Input voltage | 180 to 240V |
| Input current | 0.9A |
| AC input frequency | 50 to 60 Hz |
| AC input current, AC power supply | 1.6A |
| AC input surge current | 1.2/50 us, 1kV L-N/2kV L-PE and N-PE |
| Typical power (no modules) | 48W |
| Maximum power with AC power supply | 110W (no PoE) |
| Maximum power with DC power supply | 110W (no PoE) |
|
Dimensions (H x W x D)
|
1.73 x 17.5 x 12 in. (44 x 444 x 305 mm)
|
|
External power supply dimensions (H x W x D)
|
2.9 x 1.2 x 6.1 in. (75 x 30 x 155 mm)
|
| Rack height | 1 rack unit |
|
Packaging weight
|
14.0 lb (6.35 kg)
|
| Airflow | I/O side to fan side |
| Mean Time Between Failures (MTBF) (hours) at 25°C | 739 252 hours |
|
Temperature
|
32° to 104°F (0° to 40°C)
|
| Architectural highlights | |
| Multicore processors | High-performance multicore processors support high-speed WAN connections. The data plane uses an emulated flow processor (FP) that delivers application-specific integrated circuit (ASIC)-like performance that does not degrade as services are added. |
| Serial port data rates |
1200, 2400, 4800, 9600 (default), 19,200, 38,400, 57,600, 115,200, and 230,000 bps
Parity: None, even, or odd parity
Bit support: 8-bit characters. 1 start bit, 1 stop bit
|
| Integrated Gigabit Ethernet ports |
Provides up to two built-in 10/100/1000 Ethernet ports for WAN or LAN.
The 10/100/1000 Ethernet ports can support SFP-based connectivity in addition to RJ45 connections, enabling fiber or copper connectivity.
|
| Serial protocol support | Point-to-Point Protocol (PPP), Password Authentication Protocol (PAP), and Challenge Handshake Authentication Protocol (CHAP), Serial Line Internet Protocol (SLIP), X.25/ X.25 over TCP (XOT), Layer 2 Tunneling Protocol (L2TP) v3, L2TP Network Server (LNS) |
| Control and flow signals |
Control signals: Clear to Send (CTS), Request to Send (RTS), Data Terminal Ready (DTR), Data Carrier Detect (DCD)
Flow control: XON/XOFF (software), CTS/RTS (hardware)
|
| Cisco network interface modules (NIMs) |
A single integrated NIM slot allows for flexible configurations. Refer to Table 4 for supported NIM modules.
The NIM slot offers high-data-throughput capability to the route processor and to the asynchronous interfaces, switch ports.
NIMs support OIR
|
| Flash memory support |
Fixed flash memory with support for 4-GB flash; 8-GB flash for the TGX model.
USB Type A 3.0 port (rear side) provides capabilities for storage
USB Type A 2.0 port (front side) provide capabilities for USB dongle.
|
| DRAM (DDR4) |
The default control-plane memory is 4 GB,
DRAM and flash memory are provided as fixed configuration and are not field replaceable or upgradable.
|
| Async cable bracket | One, included with the C1100 TSG for up to 48 ports (32 onboard + 16 on the daughter card) |
| LED support (on chassis) | 6 Async Status, 1 System Status |
| Console/Aux and Ground | 1 Console and 1 Aux port; 1 ground connection (all on the rear panel) |
| Fan support |
3 fans on the rear panel (for C1100TG-1N24P32A). Fans are not field replaceable.
2 fans on the rear panel (for C1100TG-1N24P32A). Fans are not field replaceable.
|
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
