HOTLINE
0917684899 028 62578355
Juniper AP43-WW Indoor Wi-Fi 6 Access Point :
Thiết bị Wi-Fi 6 Juniper AP43 Indoor Access Point
| Model | AP43-WW |
| SPECIFICATIONS | |
| Wi-Fi Standard | • 802.11ax (Wi-Fi 6), including support for OFDMA, 1024-QAM, MU MIMO, Target Wake Time (TWT), Spatial Frequency Reuse (BSS Coloring). • Backwards compatibility with 802.11a/b/g/n/ac |
| Combined Highest Supported Data Rates | • Dual-Band: 3.5 Gbps • Dual-5GHz: 4.8 Gbps |
| 2.4 GHz | • 4×4 : 4 802.11ax up to 1,148 Mbps data rate |
| 5 GHz | • 4×4 : 4 802.11ax up to 2,400 Mbps data rate |
| MIMO Operation | • Four spatial stream Single User (SU) MIMO for up to 2,400 Mbps wireless data rate to individual 4×4 HE80 • Four spatial stream Multi User (MU) MIMO for up to 2,400 Mbps wireless data rate to up to four MU-MIMO capable client devices simultaneously |
| Dedicated Third Radio | • 2×2 : 2SS, Dual-band WIDS/WIPS, spectrum analysis, synthetic client and location analytics radio |
| Internal Antennas | • Four 2.4GHz omni-directional antennas with 4 dBi peak gain Four 5GHz omni-directional antennas with 6 dBi peak gain |
| Bluetooth 5.0 | • vBLE 16-element Directional Antenna Array + Omni Bluetooth Antenna |
| Beam Forming | • Transmit Beamforming and Maximal Ratio Combining |
| Power Options | • 802.3at PoE, 802.3bt PoE, 12V/3A DC power supply |
| Dimensions | • 222 x 222 x 53 mm |
| Weight | • 1.6 kg excluding mount and accessories |
| Shipping Box | • Size (L x W x H): 279 x 298 x 76 mm • Weight: 2.18 kg |
| Operating Temperature | • Internal antenna: 0° to 40° C |
| Operating Humidity | • 10% to 90% maximum relative humidity, non-condensing |
| Operating Altitude | • 3,048m |
| I/O & INDICATORS | |
| IoT Sensors | • Humidity, Pressure, Temperature |
| IoT Port | • 8-pin interface for digital I/O and analog input (0 to +5V) |
| USB | • USB2.0 support interface |
| 12VDC | • Input for optional DC power supply |
| Eth0 | • 100/1000Base-T, 2.5GBase-T (802.3bz); RJ45; PoE PD |
| Eth1 | • 10/100/1000Base-T; RJ45; optional PoE PSE mode (requires 802.3bt on Eth0) |
| Reset | • Reset to the factory default settings |
| Indicators | • One multi-color status LED |
