Standards
- IEEE 802.11ax on 2.4 GHz
- IEEE 802.11ax on 5 GHz
- Backward compatible with 802.11a/b/g/n/ac
Antenna
- 2 x 2.4 GHz: 4 dBi (Integrated Omni-Directional)
- 2 x 5 GHz: 5 dBi(Integrated Omni-Directional)
Physical Interface
- 2 x 10/100/1000 Ethernet Ports (PoE+)
- 1 x 10/100/1000 Ethernet Port (PSE Out; requires 802.3at power source)
- 1 x DC Jack
- 1 x Reset Button
LED Indicators
Power Source
- Power-over-Ethernet: 802.3af/at Input
- IEEE 802.11e Compliant Source
- 12VDC /1.5A Power Adapter
Maximum Power Consumption
|
Multiple BSSID
- 8 SSIDs on both 2.4GHz and 5GHz bands
VLAN Tagging
- Supports 802.1q SSID-to-VLAN Tagging
- Cross-Band VLAN Pass-Through
- Management VLAN
Spanning Tree
- Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
- Complaint With IEEE 802.11e Standard
- WMM
SNMP
MIB
Fast Roaming
Wireless Security
- WPA2-PSK
- WPA2-Enterprise
- WPA3-PSK
- WPA3-Enterprise
- Hide SSID in Beacons
- MAC Address Filtering, Up to 32 MACs per SSID
- Wireless STA (Client) Connected List
- Https
- SSH Tunnel
- Client Isolation
|
Operating Frequency
- Dual-Radio Concurrent 2.4 GHz & 5 GHz
Operation Modes
- Managed mode: AP, AP Mesh, Mesh
Frequency Radio
- 2.4 GHz: 2400 MHz ~ 2482 MHz
- 5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmit Power
- Up to 20 dBm on 2.4 GHz
- Up to 20 dBm on 5 GHz
- (Maximum power is limited by regulatory domain)
Radio Chains/Spatial Stream
SU-MIMO
- Two (2) spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with HE40 bandwidth to a 2×2 wireless client device under the 2.4GHz radio.
- Two (2) spatial stream Single User (SU) MIMO for up to 1,200 Mbps wireless data rate with VHT80 to a 2×2 wireless device under the 5GHz radio.
MU-MIMO
- Two (2) spatial streams Multiple (MU)-MIMO up to 1,200 Mbps wireless data rate for transmitting to two (2) streams MU-MIMO 11ax capable wireless client devices under 5GHz simultaneously.
- Two (2) spatial streams Multiple (MU)-MIMO up to 574 Mbps wireless data rate for transmitting to two (2) streams MU-MIMO 11ax capable wireless client devices under 2.4GHz simultaneously.
Supported Data Rates (Mbps):
- 802.11ax:
- 2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS = 1 to 2)
- 5 GHz: 18 to 1200 (MCS0 to MSC11, NSS = 1 to 2)
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 36, 48, 54
- 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
- 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA)
- 802.11a/g/n/ac: Orthogonal Frequency Division Multiple (OFDM)
- 802.11b: Direct-sequence spread-spectrum (DSSS)
Channelization
- 802.11ax supports high efficiency throughput (HE) —HE 20/40/80 MHz
- 802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz
- 802.11n supports high throughput (HT) —HT 20/40 MHz
- 802.11n supports high throughput under the 2.4GHz radio –HT40 MHz (256-QAM)
- 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU
Supported Modulation
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11b: BPSK, QPSK, CCK
Max Concurrent User
|
Temperature Range
- Operating: 32ºF~104ºF (0 ºC~40 ºC)
- Storage: -40 ºF~176 ºF (-40 ºC~80 ºC)
Humidity (non-condensing)
- Operating: 90% or less
- Storage: 90% or less
Dimensions & Weight
- Weight: 269g
- Width: 140 mm
- Length: 90 mm
- Height: 40 mm
Package Contents
- 1 – ECW215 Cloud Managed Indoor Access Point
- 1 – Junction Plate (short)
- 1 – Junction Plate (tall)
- 1 – Mounting Screw Kit
- 1 – Quick Installation Guide
Compliance Regulatory
|