- Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
- 5 GHz 802.11a/n/ac/ax client access radio
- 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
- 2.4 GHz Bluetooth Low Energy radio with Beacon support
- Concurrent operation of all four radios
- Max aggregate frame rate: 3.5 Gbps
- Supported frequency bands (country-specific restrictions apply):
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350 GHz (UNII-2)
- 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
- 5.1725-5.825 GHz (UNII-3)
- Antenna
- Integrated omni-directional antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
- Individual antenna elements for each radio
- 802.11ax, 802.11ac Wave 2, and 802.11n Capabilities
- UL/DL OFDMA, TWT support, BSS coloring
- 4×4 multiple input, multiple output (MIMO) with 4 spatial streams
- UL/DL SU-MIMO and MU-MIMO Support
- Maximal ratio combining (MRC) and beamforming
- 20 and 40 MHz channels (802.11n) 20, 40 and 80 MHz channels (802.11ac Wave 2) 20, 40 and 80 MHz channels (802.11ax)
- Up to 1024 QAM on both 2.4 GHz and 5 GHz bands
- Packet aggregation
- Power
- Power over Ethernet: 42.5 - 57 V (802.3at) (802.3at compliant)
- Alternative 12V DC input
- Power consumption: 30W max (802.3at)
- Power over Ethernet injector and DC adapter sold separately
- Interfaces
- 1× 100/1000/2.5G BASE-T Ethernet
- 1× DC power connector (5.5 mm × 2.5 mm, center positive)
- Mounting
- All standard mounting hardware included
- Desktop, ceiling and wall mount capable
- Ceiling tile rail (9/16, 15/16, or 1 1/2" flush or recessed rails), assorted cable junction boxes
- Bubble level on mounting cradle for accurate horizontal wall mounting
- Physical Security
- Two security screw options included
- Kensington lock hard point
- Concealed mount plate with anti-tamper cable bay
- Environment
- Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
- Humidity: 5 to 95% non-condensing
- Physical Dimensions
- 12.05" × 5.06" × 1.74" (30.6 cm × 12.84 cm × 4.43 cm), not including deskmount feet or mount plate
- Weight: 28.21 oz (0.8 kg)
- Security
- Integrated Layer 7 firewall with mobile device policy management
- Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
- Flexible guest access with device isolation
- VLAN tagging (802.1Q) and tunneling with IPSec VPN
- PCI compliance reporting
- WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)
- EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
- TKIP and AES encryption
- Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration
- Cisco ISE integration for guest access and BYOD posturing
- Quality of Service
- Advanced Power Save (U-APSD)
- WMM Access Categories with DSCP and 802.1p support
- Layer 7 application traffic identification and shaping
- Mobility
- PMK, OKC, and 802.11r for fast Layer 2 roaming
- Distributed or centralized Layer 3 roaming
- Analytics
- Embedded location analytics reporting and device tracking
- Global L7 traffic analytics reporting per network, per device, and per application
- Warranty
- Lifetime hardware warranty with advanced replacement included
- Ordering Information
- MR46-HW: Meraki MR46 Cloud Managed 802.11ax AP
- MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
- MA-INJ-5-XX: Cisco Meraki 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
- Note: Meraki access point license required