Bạn đang cần tư vấn về sản phẩm Meraki MR36-HW
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Đánh giá
của bạn
Điểm
5/5 trên
1
đánh giá
Wireless Cisco
Wireless HPE
Wireless Extreme
Wireless Huawei
Wireless Meraki
Wireless Alcatel
Wireless FortiAP
Wireless UniFi
Wireless Ruckus
Wireless Juniper
Wireless Planet
Wireless EnGenius
Wireless Linksys
Wireless D-link
Wireless Tp-link
Wireless Cambium
Wireless Zyxel
Wireless Ruijie
Wireless H3C
Wireless Khác
Bộ phát Wifi MR36-HW Meraki MR36 Wi-Fi 6 Indoor AP
Cisco Meraki MR36 là Access Point Wi-Fi 6 (802.11ax) 2x2:2 MU-MIMO, hỗ trợ tốc độ tổng hợp lên đến 1.5 Gbps. Thiết bị tích hợp 4 radio: hai radio phục vụ truy cập (2.4 GHz và 5 GHz), một radio chuyên dụng cho WIDS/WIPS & RF analytics, và một radio Bluetooth Low Energy (BLE) cho beacon và quét thiết bị. MR36 được quản lý hoàn toàn qua Meraki Cloud, giúp triển khai nhanh chóng, giám sát liên tục và cập nhật tự động.

Cisco Meraki MR36 là dòng Wi-Fi 6 Access Point tầm trung, được thiết kế cho các môi trường có mật độ người dùng cao như văn phòng, trường học, bệnh viện, cửa hàng và khách sạn. Thiết bị nổi bật với hiệu năng mạnh mẽ, bảo mật doanh nghiệp tích hợp và khả năng quản lý tập trung qua cloud Meraki Dashboard.
• Cổng kết nối 1× Gigabit Ethernet uplink, hỗ trợ nguồn PoE (802.3af/at)
• Wi-Fi 6 (802.11ax) với MU-MIMO và OFDMA, tối ưu hiệu suất cho nhiều thiết bị kết nối đồng thời.
• Tốc độ tổng hợp 1.5 Gbps, gồm 1,201 Mbps trên băng tần 5 GHz và 286 Mbps trên băng tần 2.4 GHz.
• Radio chuyên dụng WIDS/WIPS, đảm bảo bảo mật không dây và phân tích RF liên tục 24/7.
• Bluetooth Low Energy (BLE) tích hợp, hỗ trợ beacon và quét thiết bị IoT.
• Quản lý cloud Meraki Dashboard, triển khai plug-and-play, giám sát từ xa và cập nhật firmware tự động.
• Bảo mật doanh nghiệp tích hợp, hỗ trợ WPA3, AES encryption, 802.1X, VLAN tagging, PCI compliance và Cisco ISE.
• Traffic shaping thông minh, phân loại và ưu tiên ứng dụng quan trọng, hạn chế lưu lượng không cần thiết.
• Tối ưu cho thoại và video, hỗ trợ QoS, WMM, DSCP, giảm độ trễ cho ứng dụng VoIP và video HD.
• Phân tích nâng cao, cung cấp dữ liệu về hành vi người dùng, số lượt truy cập, thời gian lưu trú và xu hướng.
• Thiết kế nhỏ gọn, thẩm mỹ, dễ dàng lắp đặt trên trần, tường hoặc bàn, phù hợp với không gian văn phòng hiện đại.
Meraki MR36 được ứng dụng rộng rãi trong văn phòng, trường học, bệnh viện, cửa hàng bán lẻ và khách sạn, nơi cần Wi-Fi tốc độ cao, bảo mật mạnh mẽ, hỗ trợ nhiều thiết bị di động cùng lúc và quản lý tập trung từ xa qua cloud.
Cisco Meraki MR36 là giải pháp Wi-Fi 6 lý tưởng cho các tổ chức cần hiệu năng mạnh mẽ, bảo mật toàn diện và quản lý tập trung. Với khả năng triển khai nhanh, tự động tối ưu RF, tích hợp BLE và phân tích nâng cao, MR36 giúp doanh nghiệp nâng cao trải nghiệm người dùng, giảm chi phí vận hành và đảm bảo hạ tầng mạng không dây luôn an toàn, ổn định.
| Model | MR36 |
| Usage | Next-generation entry-level high-performance Wi-Fi 6 AP with security-scanning radio and Bluetooth® Low Energy included |
| Radio specification | 1× 2.4 GHz 802.11b/g/n/ax 1× 5 GHz 802.11a/n/ac/ax 1× WIDS/WIPS 1× Bluetooth® radio 1.5 Gbps max rate 2× 2:2 MU-MIMO with beamforming |
| Interface | 1× Gigabit Ethernet port |
| Power | 802.3af POE or DC power adapter |
| Performance features | 2× 2:2 MU-MIMO and OFDMA 160 MHz channels Priority voice, power save (802.11e/WMM) Hardware-accelerated encryption Band steering |
| Dimensions | 9.84 in × 4.72 in x 1.42 in (25 cm x 12 cm x 3.6 cm) |
| Weight | 17.35 oz (0.5 kg) |
| License | Description |
| Meraki Enterprise License | |
| LIC-ENT-1YR | Cisco Meraki MR Enterprise License and Support, 1 Year |
| LIC-ENT-3YR | Cisco Meraki MR Enterprise License and Support, 3 Years |
| LIC-ENT-5YR | Cisco Meraki MR Enterprise License and Support, 5 Years |
| Meraki Advanced License | |
| LIC-MR-ADV-1Y | Cisco Meraki MR Advanced License and Support, 1 Year |
| LIC-MR-ADV-3Y | Cisco Meraki MR Advanced License and Support, 3 Years |
| LIC-MR-ADV-5Y | Cisco Meraki MR Advanced License and Support, 5 Years |
Xem thêm
Rút gọn
| Model | MR36 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS & spectrum analysis radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support |
| Antenna | Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2x2 MIMO with two spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 37–57 V (802.3af compatible); Alternative: 12 V DC input; Max consumption 15W; PoE injector and DC adapter sold separately |
| Interfaces | 1x 10/100/1000 BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 257,215 hrs at +25°C |
| Physical Dimensions | 9.84” x 4.72” x 1.42” (25 cm x 12 cm x 3.6 cm); Weight: 17.35 oz (492 g) |
| Security | Integrated Layer 7 firewall; Real-time WIDS/WIPS with rogue AP containment; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA2, WPA, WEP*; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR36-HW: Meraki MR36 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Meraki MR36-HW
| Model | MR36 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS & spectrum analysis radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support |
| Antenna | Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2x2 MIMO with two spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 37–57 V (802.3af compatible); Alternative: 12 V DC input; Max consumption 15W; PoE injector and DC adapter sold separately |
| Interfaces | 1x 10/100/1000 BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 257,215 hrs at +25°C |
| Physical Dimensions | 9.84” x 4.72” x 1.42” (25 cm x 12 cm x 3.6 cm); Weight: 17.35 oz (492 g) |
| Security | Integrated Layer 7 firewall; Real-time WIDS/WIPS with rogue AP containment; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA2, WPA, WEP*; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR36-HW: Meraki MR36 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
| Model | MR36 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS & spectrum analysis radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support |
| Antenna | Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2x2 MIMO with two spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 37–57 V (802.3af compatible); Alternative: 12 V DC input; Max consumption 15W; PoE injector and DC adapter sold separately |
| Interfaces | 1x 10/100/1000 BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 257,215 hrs at +25°C |
| Physical Dimensions | 9.84” x 4.72” x 1.42” (25 cm x 12 cm x 3.6 cm); Weight: 17.35 oz (492 g) |
| Security | Integrated Layer 7 firewall; Real-time WIDS/WIPS with rogue AP containment; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA2, WPA, WEP*; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR36-HW: Meraki MR36 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
Cisco Meraki MR36 được cấp nguồn ra sao?
Meraki MR36 hỗ trợ hai hình thức cấp nguổn:
- Power over Ethernet (PoE) chuẩn 802.3af (điện áp 37 – 57V), tiêu thụ tối đa 15W
- Nguồn DC 12V trực tiếp (bộ chuyển đổi DC bán riêng)
Lưu ý: Có thể sử dụng bộ injector PoE MA-INJ-4 (PoE+) hoặc MA-INJ-6 (PoE++).
Meraki MR36 phù hợp với những mô hình triển khai thực tế nào?
MR36 phù hợp cho văn phòng, trường học, bệnh viện, cửa hàng bán lẻ và khách sạn, nơi cần Wi-Fi tốc độ cao, bảo mật mạnh mẽ, hỗ trợ nhiều thiết bị di động cùng lúc và quản lý tập trung từ xa.
MR36 có giao diện cổng như thế nào?
Meraki MR36 có 1 cổng Gigabit Ethernet (RJ45) hỗ trợ uplink và PoE, cùng với 1 cổng nguồn DC (5.5 mm x 2.5 mm, center positive).