Bạn đang cần tư vấn về sản phẩm Meraki MR44-HW
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Đánh giá
của bạn
Điểm
5/5 trên
1
đánh giá
Wireless Cisco
Wireless HPE
Wireless Extreme
Wireless Huawei
Wireless Meraki
Wireless Alcatel
Wireless FortiAP
Wireless UniFi
Wireless Ruckus
Wireless Juniper
Wireless Planet
Wireless EnGenius
Wireless Linksys
Wireless D-link
Wireless Tp-link
Wireless Cambium
Wireless Zyxel
Wireless Ruijie
Wireless H3C
Wireless Khác
Bộ phát Wifi MR44-HW Meraki MR44 Cloud Managed 802.11ax AP
Meraki MR44 là Access Point Wi-Fi 6 (802.11ax) với cấu hình 2x2:2 cho băng tần 2.4 GHz và 4x4:4 cho băng tần 5 GHz, hỗ trợ tốc độ tổng hợp lên đến 2.7 Gbps. Thiết bị tích hợp 4 radio: hai radio phục vụ truy cập, một radio chuyên dụng cho WIDS/WIPS & RF analytics, và một radio Bluetooth Low Energy (BLE). MR44 được quản lý hoàn toàn qua Meraki Cloud, giúp triển khai nhanh chóng, giám sát liên tục và cập nhật tự động.

Cisco Meraki MR44 là dòng Wi-Fi 6 Access Point hiệu năng cao, được thiết kế cho các môi trường có mật độ người dùng lớn như văn phòng, trường học, bệnh viện, cửa hàng và khách sạn. Thiết bị nổi bật với tốc độ lên đến 2.7 Gbps, bảo mật doanh nghiệp tích hợp và khả năng quản lý tập trung qua cloud Meraki Dashboard.
• Cổng kết nối 1× 2.5GBASE-T Ethernet uplink, hỗ trợ nguồn PoE (802.3af/at) hoặc adapter DC.
• Wi-Fi 6 (802.11ax) với MU-MIMO và OFDMA, tối ưu hiệu suất cho nhiều thiết bị kết nối đồng thời.
• Tốc độ tổng hợp 2.7 Gbps, gồm 2,402 Mbps trên băng tần 5 GHz và 287 Mbps trên băng tần 2.4 GHz.
• Radio chuyên dụng WIDS/WIPS, đảm bảo bảo mật không dây và phân tích RF liên tục 24/7.
• Bluetooth Low Energy (BLE) tích hợp, hỗ trợ beacon và quét thiết bị IoT.
• Quản lý cloud Meraki Dashboard, triển khai plug-and-play, giám sát từ xa và cập nhật firmware tự động.
• Bảo mật doanh nghiệp tích hợp, hỗ trợ WPA3, AES encryption, 802.1X, VLAN tagging, PCI compliance và Cisco ISE.
• Traffic shaping thông minh, phân loại và ưu tiên ứng dụng quan trọng, hạn chế lưu lượng không cần thiết.
• Tối ưu cho thoại và video, hỗ trợ QoS, WMM, DSCP, giảm độ trễ cho ứng dụng VoIP và video HD.
• Phân tích nâng cao, cung cấp dữ liệu về hành vi người dùng, số lượt truy cập, thời gian lưu trú và xu hướng.
Meraki MR44 được ứng dụng rộng rãi trong văn phòng, trường học, bệnh viện, cửa hàng bán lẻ và khách sạn, nơi cần Wi-Fi tốc độ cao, bảo mật mạnh mẽ, hỗ trợ nhiều thiết bị di động cùng lúc và quản lý tập trung từ xa qua cloud.
Cisco Meraki MR44 là giải pháp Wi-Fi 6 lý tưởng cho các tổ chức cần hiệu năng vượt trội, bảo mật toàn diện và quản lý tập trung. Với khả năng triển khai nhanh, tự động tối ưu RF, tích hợp BLE và phân tích nâng cao, MR44 giúp doanh nghiệp nâng cao trải nghiệm người dùng, giảm chi phí vận hành và đảm bảo hạ tầng mạng không dây luôn an toàn, ổn định.
| Model | MR44 |
| Usage | Next-generation AP with Wi-Fi 6 technology. Ideal for medium-density locations with security scanning and Bluetooth® Low Energy included. |
| Radio specification | 1 × 2.4 Ghz 802.11b/g/n/ax 1 × 5 GHz 802.11a/n/ac/ax 1 × WIDS/WIPS 1 × Bluetooth 2.7 Gbit/sec max rate 2×2:2 + 4×4:4 MU-MIMO with beamforming |
| Interface | 1 × 2.5 Multigigabit Ethernet port |
| Power | 802.3af/at PoE or DC power adapter |
| Performance features | 2x 2:2 + 4x 4:4 UL/DL MU-MIMO and OFDMA 160 MHz channels Priority voice, power save (802.11e/WMM) Hardware-accelerated encryption Band steering |
| Dimensions | 12.05 in x 5.06 in x 1.74 in (30.6 cm x 12.84 cm x 4.43 cm) |
| Weight | 26.07 oz (0.74 kg) |
| License | Description |
| Meraki Enterprise License | |
| LIC-ENT-1YR | Cisco Meraki MR Enterprise License and Support, 1 Year |
| LIC-ENT-3YR | Cisco Meraki MR Enterprise License and Support, 3 Years |
| LIC-ENT-5YR | Cisco Meraki MR Enterprise License and Support, 5 Years |
| Meraki Advanced License | |
| LIC-MR-ADV-1Y | Cisco Meraki MR Advanced License and Support, 1 Year |
| LIC-MR-ADV-3Y | Cisco Meraki MR Advanced License and Support, 3 Years |
| LIC-MR-ADV-5Y | Cisco Meraki MR Advanced License and Support, 5 Years |
Xem thêm
Rút gọn
| Model | MR44 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support; Concurrent operation of all four radios |
| Antenna | Internal antenna (5.1 dBi max gain at 2.4 GHz, 5.9 dBi max gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2.4 GHz: 2x2 MIMO with two spatial streams; 5 GHz: 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at) or 37–57 V (802.3af, low power mode); Alternative: 12 V DC input; Power consumption: 30W max (802.3at) or 15W max (802.3af, low power mode); PoE injector and DC adapter sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 500,000 hours at +25°C |
| Physical Dimensions | 12.05” × 5.06” × 1.74” (30.6 cm × 12.84 cm × 4.43 cm), not including desk mount feet or mount plate; Weight: 26.07 oz (739 g) |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR44-HW: Meraki MR44 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Meraki MR44-HW
| Model | MR44 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support; Concurrent operation of all four radios |
| Antenna | Internal antenna (5.1 dBi max gain at 2.4 GHz, 5.9 dBi max gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2.4 GHz: 2x2 MIMO with two spatial streams; 5 GHz: 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at) or 37–57 V (802.3af, low power mode); Alternative: 12 V DC input; Power consumption: 30W max (802.3at) or 15W max (802.3af, low power mode); PoE injector and DC adapter sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 500,000 hours at +25°C |
| Physical Dimensions | 12.05” × 5.06” × 1.74” (30.6 cm × 12.84 cm × 4.43 cm), not including desk mount feet or mount plate; Weight: 26.07 oz (739 g) |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR44-HW: Meraki MR44 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
| Model | MR44 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dedicated dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support; Concurrent operation of all four radios |
| Antenna | Internal antenna (5.1 dBi max gain at 2.4 GHz, 5.9 dBi max gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 2.4 GHz: 2x2 MIMO with two spatial streams; 5 GHz: 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at) or 37–57 V (802.3af, low power mode); Alternative: 12 V DC input; Power consumption: 30W max (802.3at) or 15W max (802.3af, low power mode); PoE injector and DC adapter sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45); 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Physical Security | Two security screw options (included); Kensington lock hard point; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating temperature: 0°C to 40°C (32°F to 104°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m) |
| Reliability | Mean Time Between Failure (MTBF): 500,000 hours at +25°C |
| Physical Dimensions | 12.05” × 5.06” × 1.74” (30.6 cm × 12.84 cm × 4.43 cm), not including desk mount feet or mount plate; Weight: 26.07 oz (739 g) |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Indoor access point lifetime hardware warranty with advanced replacement |
| Ordering Information | MR44-HW: Meraki MR44 Cloud Managed 802.11ax AP; MA-PWR-30W-XX: Meraki AC Adapter; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; Meraki AP license required |
Meraki MR44 phù hợp triển khai ở đâu?
Theo thiết kế của hãng, MR44 dành cho triển khai thế hệ tiếp theo tại:
- Văn phòng mật độ cao
- Trường học, bệnh viện
- Cửa hàng bán lẻ, khách sạn
- Các môi trường yêu cầu bảo mật không dây liên tục 24/7 (nhờ radio chuyên dụng), định vị chính xác (BLE và radio quét) và hiệu suất cao cho thoại/video với băng thông 2.7 Gbps.
MR44 sử dụng nguồn điện như thế nào?
MR44 hỗ trợ cấp nguồn qua hai hình thức:
- Power over Ethernet (PoE) chuẩn 802.3at (42.5 – 57V) hoặc 802.3af (low power mode) (37 – 57V)
- Nguồn DC 12V trực tiếp (bộ chuyển đổi DC)
Tiêu thụ điện năng: 30W tối đa khi dùng 802.3at, hoặc 15W tối đa khi dùng 802.3af (low power mode).
Lưu ý: Ở chế độ low power (802.3af), cổng uplink giảm xuống 1 Gbps, băng tần 5 GHz chuyển từ 4×4:4 sang 2×2:2, tắt radio BLE và radio quét, giảm công suất phát.
Cisco Meraki MR44 hỗ trợ công nghệ nào?
Meraki MR44 hỗ trợ MU-MIMO, OFDMA, Target Wake Time (TWT), BSS Coloring, beamforming, 1024-QAM, và packet aggregation.