31 Đường số 9, KDC Cityland, P.10, Q.Gò Vấp, TP.HCM
028 62578355
HOTLINE
0917684899  
028 62578355
Trang chủ > Sản phẩm > Thiết bị mạng HPE > Wifi Aruba > Aruba AP-503H (R3V36A)

Aruba AP-503H (R3V36A)

R3V36A - Aruba AP-503H (RW) Dual-radio 802.11ax 2x2 Unified Hospitality AP with 1+2 Ethernet.
  • Giá bán : Liên hệ để có giá tốt
  • Tình trạng : Còn hàng


Thiết bị phát sóng Wifi Aruba AP-503H (R3V36A)

Model AP-503H (R3V36A)
AP type  • Mid-range dual radio Wi-Fi 6 Hospitality AP with 1+2 Ethernet ports
Wi-Fi radio and platform specifications
5GHz radio  • Two spatial stream (SU/MU) MIMO for up to 1.2Gbps wireless data rate (HE80)
2.4GHz radio  • Two spatial stream (SU/MU) MIMO for up to 287Mbps wireless data rate (HE20)
• Note: HE40 operation is supported in 2.4GHz, but uncommon and not recommended for enterprise deployments
Maximum number of associated client devices • Up to 256 associated client devices per radio
Maximum number of BSSIDs  • 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply) • 2.400 to 2.500GHz (ISM) channels 1-13
• 5.150 to 5.250GHz (U-NII-1) channels 36, 40, 44, 48
• 5.250 to 5.350GHz (U-NII-2A) channels 52, 56, 60, 64
• 5.470 to 5.725GHz (U-NII-2C) channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144
• 5.725 to 5.850GHz (U-NII-3) channels 149, 153, 157, 161, 165
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies • 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
Supported modulation types • 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
• 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
802.11n high-throughput (HT) support  • HT20/40
802.11ac very high throughput (VHT) support • VHT20/40/80
802.11ax high efficiency (HE) support • HE20/40/80
Supported data rates (Mbps) • 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM
• 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM
• 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
• 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
802.11n/ac/ax packet aggregation • A-MPDU, A-MSDU
Transmit power  • Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements) • 2.4 GHz band: +20 dBm (17 dBm per chain)
• 5 GHz band: +21 dBm (18 dBm per chain)
• Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
Minimum configurable transmit power level  • 0dBm (conducted, per chain)
VPN IPsec throughput performance  • 100 Mbps
OTHER INTERFACES
Uplink (E0)  Ethernet wired network port (RJ45)
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
• 802.3az Energy Efficient Ethernet (EEE)
• POE-PD: 802.3af POE (class 3)
Local  Two Ethernet wired network ports (RJ45)
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
• 802.3az Energy Efficient Ethernet (EEE)
POWER SOURCES AND POWER CONSUMPTION
Power Sources: The AP supports direct DC power and Power over Ethernet • The AP supports direct DC power and Power over Ethernet
• When both DC and POE power sources are available, DC power takes priority over POE
• Power sources are sold separately; see the 500H Series Ordering Guide for details
Maximum (worst-case) power consumption (without USB or PSE / max) • DC powered: 10.0W
• POE powered (802.3af): 11.4W
Maximum (worst-case) power consumption in idle mode (without USB or PSE) • 4.5W (POE)
Maximum (worst-case) power consumption in deep-sleep mode (without USB or PSE) • 2.7W (POE)
MECHANICAL SPECIFICATIONS
Dimensions/weight (unit, excluding mount bracket) • 86mm (W) x 40mm (D) x 150mm (H)
• 290g
Dimensions/weight (shipping) • 111mm (W) x 54mm (D) x 167mm (H)
• 380g
Mounting details  • Using one of the (separate orderable) mount kits, the AP can be attached to a single or dual gang wall-box, directly to a wall, or desk mounted. See the 500H Series Ordering Guide for details.
ENVIRONMENTAL SPECIFICATIONS
Operating conditions  • Temperature: 0C to +40C / +32F to +104F
• Humidity: 5% to 93% non-condensing
• ETS 300 019 class 3.2 environments
Storage and transportation conditions • Temperature: -40C to +70C / -40F to +158F
• Humidity: 5% to 93% non-condensing
• ETS 300 019 classes 1.2 and 2.3 environments

R3V36A : Aruba AP-503H (RW) Dual-radio 802.11ax 2x2 Unified Hospitality AP with 1+2 Ethernet.

Data sheet Aruba 500h Series Hospitality Access Points

Sản phẩm liên quan

Aruba AP-505H (R3V46A)
R3V46A - Aruba AP-505H (RW) Dual-radio 802.11ax 2x2 Unified Hospitality...

Liên hệ để có giá tốt

Aruba AP-203H (JY693A)
JY693A - Aruba AP-203H (RW) Flex-radio 802.11ac 2x2 Unified Hospitality...

Liên hệ để có giá tốt

Aruba AP-303H (JY678A)
JY678A - Aruba AP-303H (RW) Dual-radio 802.11ac 2x2 Unified Hospitality...

Liên hệ để có giá tốt

Hỗ trợ trực tuyến