Bạn đang cần tư vấn về sản phẩm Cisco C9105AXI-S
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Đánh giá
của bạn
Điểm
5/5 trên
1
đánh giá
Wireless Cisco
Wireless HPE
Wireless Extreme
Wireless Huawei
Wireless Meraki
Wireless Alcatel
Wireless FortiAP
Wireless UniFi
Wireless Ruckus
Wireless Juniper
Wireless Planet
Wireless EnGenius
Wireless Linksys
Wireless D-link
Wireless Tp-link
Wireless Cambium
Wireless Zyxel
Wireless Ruijie
Wireless H3C
Wireless Khác
Cisco C9105AXI-S Bộ phát Wi-Fi 6 Indoor với 2x2 MU-MIMO và S domain
Cisco C9105AXI-S là điểm truy cập Wi-Fi 6 (802.11ax) thế hệ mới, được thiết kế với kích thước nhỏ gọn nhưng vẫn mang lại hiệu suất cao với tốc độ dữ liệu tối đa lên đến 1.488 Gbps và bảo mật toàn diện. Thiết bị hỗ trợ dual-radio trên băng tần 2.4 GHz và 5 GHz, tích hợp công nghệ MU-MIMO và OFDMA giúp tối ưu hóa kết nối trong môi trường có mật độ người dùng cao. Cisco C9105AXI phù hợp cho văn phòng, khách sạn, trường học và các chi nhánh doanh nghiệp cần Wi-Fi ổn định, dễ quản lý.

Cisco C9105AXI-S thuộc Catalyst 9105 Series chuẩn Wi-Fi 6 là điểm truy cập thế hệ mới cấp doanh nghiệp, được thiết kế hoạt động bền bĩ, an toàn và thông minh. Khả năng siêu kết nối với hiệu suất ổn định trong môi trường đòi hỏi khắt khe. Khả năng phục hồi và kết nối vượt trội, bảo mật tích hợp với khả năng phân loại và ngăn chặn nâng cao cũng như những đổi mới về phần cứng và phần mềm để tự động hóa, bảo mật và đơn giản hóa mạng.
Cisco C9105AXI được ứng dụng trong doanh nghiệp vừa và nhỏ, khách sạn, trường học, bệnh viện, cửa hàng bán lẻ và chi nhánh, nơi cần Wi-Fi tốc độ cao, bảo mật toàn diện, dễ quản lý tập trung và triển khai nhanh chóng với chi phí hợp lý.
Với thiết kế nhỏ gọn, tốc độ Wi-Fi 6 lên đến 1.488 Gbps, bảo mật toàn diện và khả năng quản lý tập trung, Cisco C9105AXI là lựa chọn tối ưu cho các tổ chức cần mạng không dây ổn định, linh hoạt và dễ quản lý trong môi trường vừa và nhỏ.
Xem thêm
Rút gọn
| Model | C9105AXI-S | |
| Description | Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas | |
| Software | ● Cisco IOS XE Software Release 17.3.1, or later | |
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers | |
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller | ||
| 802.11n version 2.0 (and related) capabilities | ● 2x2 MIMO with two spatial streams | |
| ● Maximal Ratio Combining (MRC) | ||
| ● 802.11n and 802.11a/g | ||
| ● 20- and 40-MHz channels | ||
| ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||
| ● 802.11 Dynamic Frequency Selection (DFS) | ||
| ● Cyclic Shift Diversity (CSD) support | ||
| 802.11ac | ● 2x2 downlink MU-MIMO with two spatial streams | |
| ● MRC | ||
| ● 802.11ac beamforming | ||
| ● 20-, 40-, 80- MHz channels | ||
| ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| 802.11ax | ● 2x2 uplink/downlink MU-MIMO with two spatial streams | |
| ● Uplink/downlink OFDMA | ||
| ● TWT | ||
| ● BSS coloring | ||
| ● MRC | ||
| ● 802.11ax beamforming | ||
| ● 20-, 40-, 80- channels | ||
| ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| Integrated antenna | ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |
| ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth | ||
| Interfaces | ● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface | |
| ● Management console port (RJ-45) | ||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |
| Dimensions(W x L x H) | ● Access point (without mounting brackets): | |
| ◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) | ||
| Weight | ● 0.7 lb. (329.5g) | |
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE) | |
| ● Cisco power injector, AIR-PWRINJ6= | ||
| ● 802.3af PoE | ||
| ● Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af) | ||
| Environmental | Cisco Catalyst 9105AXI | |
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) | ||
| ● Operating temperature: 32° to 122°F (0° to 50°C) | ||
| ● Operating humidity: 10% to 90% (noncondensing) | ||
| ● Operating altitude test: 40˚C, 9843 ft.(3000 m) | ||
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio. | ||
| Available transmit power settings (Max/Min) | ● 2.4 GHz | ● 5 GHz |
| ◦ 20 dBm (100 mW) | ◦ 20 dBm (100 mW) | |
| ◦ -7 dBm (0.2 mW) | ◦ -7 dBm (0.2 mW) | |
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Cisco C9105AXI-S
| Model | C9105AXI-S | |
| Description | Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas | |
| Software | ● Cisco IOS XE Software Release 17.3.1, or later | |
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers | |
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller | ||
| 802.11n version 2.0 (and related) capabilities | ● 2x2 MIMO with two spatial streams | |
| ● Maximal Ratio Combining (MRC) | ||
| ● 802.11n and 802.11a/g | ||
| ● 20- and 40-MHz channels | ||
| ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||
| ● 802.11 Dynamic Frequency Selection (DFS) | ||
| ● Cyclic Shift Diversity (CSD) support | ||
| 802.11ac | ● 2x2 downlink MU-MIMO with two spatial streams | |
| ● MRC | ||
| ● 802.11ac beamforming | ||
| ● 20-, 40-, 80- MHz channels | ||
| ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| 802.11ax | ● 2x2 uplink/downlink MU-MIMO with two spatial streams | |
| ● Uplink/downlink OFDMA | ||
| ● TWT | ||
| ● BSS coloring | ||
| ● MRC | ||
| ● 802.11ax beamforming | ||
| ● 20-, 40-, 80- channels | ||
| ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| Integrated antenna | ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |
| ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth | ||
| Interfaces | ● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface | |
| ● Management console port (RJ-45) | ||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |
| Dimensions(W x L x H) | ● Access point (without mounting brackets): | |
| ◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) | ||
| Weight | ● 0.7 lb. (329.5g) | |
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE) | |
| ● Cisco power injector, AIR-PWRINJ6= | ||
| ● 802.3af PoE | ||
| ● Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af) | ||
| Environmental | Cisco Catalyst 9105AXI | |
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) | ||
| ● Operating temperature: 32° to 122°F (0° to 50°C) | ||
| ● Operating humidity: 10% to 90% (noncondensing) | ||
| ● Operating altitude test: 40˚C, 9843 ft.(3000 m) | ||
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio. | ||
| Available transmit power settings (Max/Min) | ● 2.4 GHz | ● 5 GHz |
| ◦ 20 dBm (100 mW) | ◦ 20 dBm (100 mW) | |
| ◦ -7 dBm (0.2 mW) | ◦ -7 dBm (0.2 mW) | |
| Model | C9105AXI-S | |
| Description | Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas | |
| Software | ● Cisco IOS XE Software Release 17.3.1, or later | |
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers | |
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller | ||
| 802.11n version 2.0 (and related) capabilities | ● 2x2 MIMO with two spatial streams | |
| ● Maximal Ratio Combining (MRC) | ||
| ● 802.11n and 802.11a/g | ||
| ● 20- and 40-MHz channels | ||
| ● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | ||
| ● 802.11 Dynamic Frequency Selection (DFS) | ||
| ● Cyclic Shift Diversity (CSD) support | ||
| 802.11ac | ● 2x2 downlink MU-MIMO with two spatial streams | |
| ● MRC | ||
| ● 802.11ac beamforming | ||
| ● 20-, 40-, 80- MHz channels | ||
| ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| 802.11ax | ● 2x2 uplink/downlink MU-MIMO with two spatial streams | |
| ● Uplink/downlink OFDMA | ||
| ● TWT | ||
| ● BSS coloring | ||
| ● MRC | ||
| ● 802.11ax beamforming | ||
| ● 20-, 40-, 80- channels | ||
| ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) | ||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | ||
| ● 802.11 DFS | ||
| ● CSD support | ||
| ● WPA3 support | ||
| Integrated antenna | ● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |
| ● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth | ||
| Interfaces | ● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface | |
| ● Management console port (RJ-45) | ||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |
| Dimensions(W x L x H) | ● Access point (without mounting brackets): | |
| ◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) | ||
| Weight | ● 0.7 lb. (329.5g) | |
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE) | |
| ● Cisco power injector, AIR-PWRINJ6= | ||
| ● 802.3af PoE | ||
| ● Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af) | ||
| Environmental | Cisco Catalyst 9105AXI | |
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) | ||
| ● Operating temperature: 32° to 122°F (0° to 50°C) | ||
| ● Operating humidity: 10% to 90% (noncondensing) | ||
| ● Operating altitude test: 40˚C, 9843 ft.(3000 m) | ||
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio. | ||
| Available transmit power settings (Max/Min) | ● 2.4 GHz | ● 5 GHz |
| ◦ 20 dBm (100 mW) | ◦ 20 dBm (100 mW) | |
| ◦ -7 dBm (0.2 mW) | ◦ -7 dBm (0.2 mW) | |
Cisco C9105AXI phù hợp với những môi trường và ứng dụng nào?
Cisco C9105AXI được ứng dụng trong doanh nghiệp vừa và nhỏ, khách sạn, trường học, bệnh viện và cửa hàng bán lẻ, nơi cần Wi-Fi tốc độ vừa phải, bảo mật toàn diện, dễ quản lý và triển khai nhanh chóng với chi phí hợp lý.
Cisco C9105AXI có những cổng kết nối nào?
Cisco C9105AXI được trang bị:
- 1 cổng Uplink Ethernet 10/100/1000 Base-T (RJ-45), hỗ trợ PoE.
- 1 cổng quản lý console (RJ-45).
Không có cổng USB trên model C9105AXI (cổng USB chỉ có trên model C9105AXW).
Cisco C9105AXI hoạt động trên những băng tần nào?
Thiết bị C9105AXI hỗ trợ băng tần kép (dual-band) với :
- Băng tần 2.4 GHz và 5 GHz hoạt động đồng thời.
- Cả hai radio đều hỗ trợ chuẩn Wi-Fi 6 (802.11ax) và tương thích ngược với các chuẩn 802.11a/b/g/n/ac.