Danh mục

C9600X-SUP-2 Cisco Catalyst 9600 Series Supervisor 2 Module for C9606R Chassis ● ASICs Q200, 32GB DRAM, 16GB Flash, SDD Up to 960 GB ● Switching Capacity: up to 25.6 Tbps (6.4 Tbps bandwidth per slot).

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị mạng Cisco C9600X-SUP-2 Catalyst 9600 Series Supervisor 2 Module

Product Number	C9600X-SUP-2=
Description	Cisco Catalyst 9600 Series Supervisor 2 Module
Chassis slot	Slot 3 or 4
Minimum software	Cisco IOS XE 17.7.1
Supervisor Engine 2	6.4 Tbps per slot
Performance and Scalability features
System Switching Capacity	Up to 25.6 Tbps
Per-slot Switching Capacity	Up to 6.4 Tbps
ASICs	1x Q200
Forwarding Rate	8 Bpps
DRAM	32 GB
Flash	16 GB
SSD capacity	Up to 960 GB
VLAN IDs	4096
PVST Instances	4096
Switched Virtual Interfaces (SVIs)	4096
Jumbo frames	9216
Total number of MAC Addresses	Up to 256,000
Total number of IPv4 Routes	Up to 2.000.000
Total number of IPv6 Routes	Up to 1.000.000
Address Resolution Protocol (ARP) entries	Up to 128.000
Neighbor Discovery Protocol (NDP) entries	Up to 128.000
Multicast routes	Up to 32,000
QoS ACL Scale	Up to 8.000 (Ipv4) Up to 4.000 (Ipv6)
Security ACL Scale	Up to 8.000 (Ipv4) Up to 4.000 (Ipv6)
MACsec sessions	Up to 1,024 per PHY
NetFlow entries (Ipv4/Ipv6)	Up to 2.000.000 (sampled)
Packet buffer	80 MB (Shared Memory System) + 8 GB (High Bandwidth Memory)
Physical Specifications
Dimensions (H x W x D)	1.7 x 15.0 x 13.41 in. (4.32 x 38.1 x 34.06 cm) to faceplate 1.7 x 15.0 x 15.7 in. (4.32 x 38.1 x 39.88 cm) to ejector
Weight	5.45 Kg (12.02 lb)
Rack Units (RU)	1 RU
Operating temperature	-5° to 45° C (23° to 113° F) up to 6000 feet -5° to 40° C (23° to 104° F) up to 10,000 feet
Relative humidity, operating and nonoperating, noncondensing	10% to 95%, noncondensing
Altitude	-60 to 3000 m (-197 to 9843 feet)
Mean Time Between Failures (MTBF) (hours)	305.880
Software requirements
9600X-SUP-2	Cisco IOS XE Software version 17.7.1

Cisco C9600X-SUP-X Supervisor 2 Hỗ trợ các Line-card:

Line Card	Description
C9600-LC-40YL4CD	40-Port 10/25/50GE2 , 2-Port 100GE/200GE2 , 2-Port 400GE
C9600-LC-24C	24-Port 40GE/ 12- Port 100GE
C9600-LC-48YL	48-Port 1GE/10GE/25GE/50GE
C9600-LC-48TX	48- Port 100M/1GE1 /2.5GE/5GE/10GE

Network Advantage Package Features

Features	Network Advantage
Switch Fundamentals Layer 2, Routed Access (RIP, EIGRP Stub, OSPF stub), VRRP, PIM Stub Multicast, PBR, Cisco Discovery Protocol (CDP), QoS, FHS, CoPP, SXP, IP SLA Responder, SSO	✔
Advanced Switch Capabilities and Scale BGP, EIGRP, IS-IS, OSPF, IP SLA, BSR, MSDP, PIM SM, PIM SSM, Bidir	✔
Network Segmentation VRF, Cisco TrustSec, SGT, CMD1 , VXLAN, LISP, MPLS, EVPN-BGP1 , mVPN	✔
Automation NETCONF, RESTCONF, gRPC, gNMI/gNOI, YANG, PnP Agent, ZTP/Open PnP, GuestShell (on-box Python)	✔
Telemetry and Visibility Model-Driven Telemetry (MDT), Flexible NetFlow (FNF) , SPAN, RSPAN	✔
High Availability and Resiliency SSO, SMU, ISSU, HSRP, GIR, NSF, StackWise Virtual	✔
Security IP RACL/VACL/PACL, OGACL, SGACL, MACsec-256, WAN MACsec	✔

Data sheet Cisco Catalyst 9600 Supervisor Engine Modules

Cisco DNA Advantage package features

Features	Cisco DNA Advantage
Switch Features
Optimized Network Deployments Cisco DNA Service for Bonjour	✔
Advanced Telemetry and Visibility NetFlow, EEM	✔
Optimized Telemetry and Visibility ERSPAN, app hosting (in containers/VMs), Wireshark	✔
Cisco DNA Center Features
Day-0 Network Bring-up Automation Cisco Network Plug and Play application, network settings, device credentials, LANautomation, host onboarding	✔
Element Management Discovery, inventory, topology, software image, licensing, and configuration management	✔
Element Management Patch management	✔
Basic Assurance Health dashboards – network, client, application; switch and wired client health monitoring	✔
SD-Access Policy-based automation and assurance for wired and wireless	✔
Network Assurance and Analytics Global insights, trends, compliance, custom reports; Switch 360, Wired Client 360; fabric and non- fabric insights	✔