Bạn đang cần tư vấn về sản phẩm Cisco CW9166D1-ROW
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Đánh giá
của bạn
Điểm
5/5 trên
1
đánh giá
Wireless Cisco
Wireless HPE
Wireless Extreme
Wireless Huawei
Wireless Meraki
Wireless Alcatel
Wireless FortiAP
Wireless UniFi
Wireless Ruckus
Wireless Juniper
Wireless Planet
Wireless EnGenius
Wireless Linksys
Wireless D-link
Wireless Tp-link
Wireless Cambium
Wireless Zyxel
Wireless Ruijie
Wireless H3C
Wireless Khác
Cisco CW9166D1-ROW Bộ phát Wi-Fi 6E Indoor với 4x4 MU-MIMO và ROW domain
Cisco CW9166D1-ROW là một biến thể đặc biệt trong dòng điểm truy cập Wi-Fi 6E (802.11ax) Catalyst 9166 Series, hỗ trợ băng tần 6 GHz mới, tốc độ dữ liệu tối đa lên đến 7.78 Gbps, được thiết kế dành riêng cho các không gian rộng lớn với trần cao và môi trường triển khai phức tạp

Cisco CW9166D1 được trang bị hệ thống anten định hướng (directional antenna) tích hợp sẵn với độ lợi cao, giúp loại bỏ nhu cầu sử dụng anten rời phức tạp. Sản phẩm vẫn giữ nguyên khả năng linh hoạt quản lý kép (on-premises với Catalyst 9800 hoặc đám mây Meraki), đồng thời cung cấp hiệu năng vượt trội cho các khu vực như khán phòng, nhà kho, trung tâm hội nghị hay sân bay.
Cisco CW9166D1 là giải pháp tối ưu cho các không gian lớn, trần cao và yêu cầu vùng phủ sóng định hướng chính xác như giảng đường, nhà kho, nhà máy, trung tâm hội nghị, bảo tàng, hành lang dài trong sân bay và khu triển lãm – những nơi thường phải sử dụng anten ngoài phức tạp.
Với hệ thống anten định hướng tích hợp độ lợi cao (lên đến 8 dBi), hiệu năng Wi-Fi 6E vượt trội (tốc độ 7.78 Gbps, 12 luồng không gian), khả năng quản lý kép linh hoạt (Catalyst 9800 và Meraki cloud) cùng các tính năng thông minh như cảm biến môi trường và Zero Wait DFS, Cisco CW9166D1 là sự lựa chọn hoàn hảo cho các tổ chức cần một giải pháp không dây mạnh mẽ, dễ triển khai và tối ưu cho các không gian rộng lớn mà không phải đối mặt với sự phức tạp của anten rời.
Xem thêm
Rút gọn
| Model | CW9166D1-ROW | ||
| Description | Cisco Catalyst 9166 Series Indoor with integrated, directional antennas | ||
| Software | ● Cisco IOS® XE Software Release 17.12.1 or later | ||
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) | ||
| ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode | |||
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams | ||
| ● Maximal Ratio Combining (MRC) | |||
| ● 802.11n and 802.11a/g | |||
| ● 20- and 40-MHz channels | |||
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5GHz and 20 MHz with 2.4GHz) | |||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | |||
| ● 802.11 Dynamic Frequency Selection (DFS) | |||
| ● Cyclic Shift Diversity (CSD) support | |||
| 802.11ac | ● 4x4 downlink MU-MIMO with four spatial streams | ||
| ● MRC | |||
| ● 802.11ac beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels | |||
| ● PHY data rates up to 3.4 Gbps (Dual 4x4 80+80 MHz on 5GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● Wi-Fi Protected Access (WPA) 3 support | |||
| 802.11ax | ● 1024 QAM | ||
| ● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4GHz, 5GHz and 6GHz) | |||
| ● Uplink/downlink OFDMA | |||
| ● TWT | |||
| ● BSS coloring | |||
| ● MRC | |||
| ● 802.11ax beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels (6GHz) | |||
| ● 20-, 40-, 80-, and 80+80-MHz channels (5GHz) | |||
| ● 20-MHz channels (2.4GHz) | |||
| ● PHY data rates up to 7.78 Gbps (4x4 160 MHz on 6GHz, 4x4 80 MHz on 5GHz, and 4x4 20 MHz on 2.4GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● WPA3 support | |||
| Antennas | ● 2.4GHz: Peak gain 6 dBi, directional antenna, (70x70) | ||
| ● 5GHz: Peak gain 6 dBi, directional antenna, (70x70) | |||
| ● 5GHz (XOR): Peak gain 8 dBi, directional antenna, (60x60) | |||
| ● 6GHz: Peak gain 8 dBi, directional antenna, (60x60) | |||
| Interfaces | ● 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) | ||
| ● Management console port (RJ-45) | |||
| ● USB 2.0 at 4.5W | |||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | ||
| Dimensions (W x L x H) | ● Access point (without mounting brackets): 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm) | ||
| Weight | ● 3.50 lb (1.59 kg) | ||
| Input power requirements | ● 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) | ||
| ● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 | |||
| ● 802.3af PoE (only for configuration staging, all radios off) | |||
| ● DC power input (54V/MA-PWR-50WAC) | |||
| Environmental | ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) | |||
| ● Operating temperature: -4° to 122°F (-20° to 50°C) | |||
| ● Operating humidity: 10% to 90% (noncondensing) | |||
| ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) | |||
| System memory | ● 2048 MB DRAM | ||
| ● 1024 MB flash | |||
| Available transmit power settings | 2.4 GHz | 5 GHz | 6 GHz |
| ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | |
| ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | |
| Certifications | ● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security | ||
| ● Bluetooth SIG: Bluetooth Low Energy (BLE) | |||
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Cisco CW9166D1-ROW
| Model | CW9166D1-ROW | ||
| Description | Cisco Catalyst 9166 Series Indoor with integrated, directional antennas | ||
| Software | ● Cisco IOS® XE Software Release 17.12.1 or later | ||
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) | ||
| ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode | |||
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams | ||
| ● Maximal Ratio Combining (MRC) | |||
| ● 802.11n and 802.11a/g | |||
| ● 20- and 40-MHz channels | |||
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5GHz and 20 MHz with 2.4GHz) | |||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | |||
| ● 802.11 Dynamic Frequency Selection (DFS) | |||
| ● Cyclic Shift Diversity (CSD) support | |||
| 802.11ac | ● 4x4 downlink MU-MIMO with four spatial streams | ||
| ● MRC | |||
| ● 802.11ac beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels | |||
| ● PHY data rates up to 3.4 Gbps (Dual 4x4 80+80 MHz on 5GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● Wi-Fi Protected Access (WPA) 3 support | |||
| 802.11ax | ● 1024 QAM | ||
| ● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4GHz, 5GHz and 6GHz) | |||
| ● Uplink/downlink OFDMA | |||
| ● TWT | |||
| ● BSS coloring | |||
| ● MRC | |||
| ● 802.11ax beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels (6GHz) | |||
| ● 20-, 40-, 80-, and 80+80-MHz channels (5GHz) | |||
| ● 20-MHz channels (2.4GHz) | |||
| ● PHY data rates up to 7.78 Gbps (4x4 160 MHz on 6GHz, 4x4 80 MHz on 5GHz, and 4x4 20 MHz on 2.4GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● WPA3 support | |||
| Antennas | ● 2.4GHz: Peak gain 6 dBi, directional antenna, (70x70) | ||
| ● 5GHz: Peak gain 6 dBi, directional antenna, (70x70) | |||
| ● 5GHz (XOR): Peak gain 8 dBi, directional antenna, (60x60) | |||
| ● 6GHz: Peak gain 8 dBi, directional antenna, (60x60) | |||
| Interfaces | ● 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) | ||
| ● Management console port (RJ-45) | |||
| ● USB 2.0 at 4.5W | |||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | ||
| Dimensions (W x L x H) | ● Access point (without mounting brackets): 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm) | ||
| Weight | ● 3.50 lb (1.59 kg) | ||
| Input power requirements | ● 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) | ||
| ● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 | |||
| ● 802.3af PoE (only for configuration staging, all radios off) | |||
| ● DC power input (54V/MA-PWR-50WAC) | |||
| Environmental | ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) | |||
| ● Operating temperature: -4° to 122°F (-20° to 50°C) | |||
| ● Operating humidity: 10% to 90% (noncondensing) | |||
| ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) | |||
| System memory | ● 2048 MB DRAM | ||
| ● 1024 MB flash | |||
| Available transmit power settings | 2.4 GHz | 5 GHz | 6 GHz |
| ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | |
| ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | |
| Certifications | ● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security | ||
| ● Bluetooth SIG: Bluetooth Low Energy (BLE) | |||
| Model | CW9166D1-ROW | ||
| Description | Cisco Catalyst 9166 Series Indoor with integrated, directional antennas | ||
| Software | ● Cisco IOS® XE Software Release 17.12.1 or later | ||
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual) | ||
| ● Cisco Catalyst 9000 switches with Embedded Wireless Controller in SDA mode | |||
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams | ||
| ● Maximal Ratio Combining (MRC) | |||
| ● 802.11n and 802.11a/g | |||
| ● 20- and 40-MHz channels | |||
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5GHz and 20 MHz with 2.4GHz) | |||
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) | |||
| ● 802.11 Dynamic Frequency Selection (DFS) | |||
| ● Cyclic Shift Diversity (CSD) support | |||
| 802.11ac | ● 4x4 downlink MU-MIMO with four spatial streams | ||
| ● MRC | |||
| ● 802.11ac beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels | |||
| ● PHY data rates up to 3.4 Gbps (Dual 4x4 80+80 MHz on 5GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● Wi-Fi Protected Access (WPA) 3 support | |||
| 802.11ax | ● 1024 QAM | ||
| ● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4GHz, 5GHz and 6GHz) | |||
| ● Uplink/downlink OFDMA | |||
| ● TWT | |||
| ● BSS coloring | |||
| ● MRC | |||
| ● 802.11ax beamforming | |||
| ● 20-, 40-, 80-, and 160-MHz channels (6GHz) | |||
| ● 20-, 40-, 80-, and 80+80-MHz channels (5GHz) | |||
| ● 20-MHz channels (2.4GHz) | |||
| ● PHY data rates up to 7.78 Gbps (4x4 160 MHz on 6GHz, 4x4 80 MHz on 5GHz, and 4x4 20 MHz on 2.4GHz) | |||
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |||
| ● 802.11 DFS | |||
| ● CSD support | |||
| ● WPA3 support | |||
| Antennas | ● 2.4GHz: Peak gain 6 dBi, directional antenna, (70x70) | ||
| ● 5GHz: Peak gain 6 dBi, directional antenna, (70x70) | |||
| ● 5GHz (XOR): Peak gain 8 dBi, directional antenna, (60x60) | |||
| ● 6GHz: Peak gain 8 dBi, directional antenna, (60x60) | |||
| Interfaces | ● 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45) | ||
| ● Management console port (RJ-45) | |||
| ● USB 2.0 at 4.5W | |||
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | ||
| Dimensions (W x L x H) | ● Access point (without mounting brackets): 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm) | ||
| Weight | ● 3.50 lb (1.59 kg) | ||
| Input power requirements | ● 802.3bt, Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+) | ||
| ● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6 | |||
| ● 802.3af PoE (only for configuration staging, all radios off) | |||
| ● DC power input (54V/MA-PWR-50WAC) | |||
| Environmental | ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | ||
| ● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) | |||
| ● Operating temperature: -4° to 122°F (-20° to 50°C) | |||
| ● Operating humidity: 10% to 90% (noncondensing) | |||
| ● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) | |||
| System memory | ● 2048 MB DRAM | ||
| ● 1024 MB flash | |||
| Available transmit power settings | 2.4 GHz | 5 GHz | 6 GHz |
| ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | ● 23 dBm (200 mW) | |
| ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | ● -4 dBm (0.39 mW) | |
| Certifications | ● Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security | ||
| ● Bluetooth SIG: Bluetooth Low Energy (BLE) | |||
Cisco CW9166D1 phù hợp với những môi trường và ứng dụng nào? Điểm khác biệt so với CW9166I?
Cisco CW9166D1 Với anten định hướng tích hợp độ lợi cao (lên đến 8 dBi) và dải nhiệt độ hoạt động rộng hơn (-20°C đến 50°C), CW9166D1 là lựa chọn lý tưởng cho các không gian rộng lớn, trần cao và yêu cầu vùng phủ sóng định hướng chính xác mà thường phải sử dụng anten ngoài phức tạp, bao gồm:
- Giảng đường, thính phòng, rạp hát
- Nhà kho, nhà máy, trung tâm logistics
- Trung tâm hội nghị, khu triển lãm
- Bảo tàng, hành lang dài trong sân bay
- Các không gian công cộng lớn có trần cao
Cisco CW9166D1 có thể được quản lý bằng những phương thức nào?
Cisco CW9166D1 được quản lý linh hoạt:
- Quản lý tại chỗ (On-premises): Sử dụng Cisco Catalyst 9800 Series Wireless Controllers (vật lý hoặc ảo).
- Quản lý qua đám mây: Sử dụng Meraki Dashboard (với model CW9166D1-MR).
- Linh hoạt chuyển đổi: Có thể chuyển đổi giữa hai chế độ quản lý mà không cần thay đổi phần cứng.
Cisco CW9166D1 hoạt động trên những băng tần nào?
Thiết bị CW9166D1 hỗ trợ kiến trúc bốn băng tần (quad-band) độc đáo với chuẩn Wi-Fi 6E, bao gồm:
- Băng tần 2.4 GHz (4x4 MIMO)
- Băng tần 5 GHz (4x4 MIMO)
- Băng tần 5 GHz XOR (4x4 MIMO) – đây là radio thứ hai trên băng tần 5 GHz.
- Băng tần 6 GHz (4x4 MIMO) – băng tần mới, sạch nhiễu.
Nhờ cấu hình này, tổng cộng có 12 luồng không gian (spatial streams), một trong những con số cao nhất trên thị trường.