| Model |
IE-9320-24T4X-E |
| Description |
Catalyst IE9300 w/ 24 Ports GE Cu Downlinks and 4 Ports 10G SFP+ uplinks, Stackable, Network Essentials |
| Hardware configurations |
| Total ports |
28 |
| Downlinks |
24 ports 10/100/1000M RJ45 |
| Uplinks (SFP/SFP+) |
4 ports 1/10G |
| Software license |
Network Essentials |
| Hardware specification |
| Hardware |
4-GB DRAM
8-GB onboard flash memory |
| Removable storage |
USB, SD card |
| Alarms |
4 dry-contact alarm inputs
1 dry-contact Form-C relay alarm output |
| Console ports |
1 RS-232 (via RJ-45), 1 Micro USB |
| Power inputs |
Dual AC/DC power inputs |
| Cisco StackWise® ports |
2 stacking ports |
| Physical configurations |
| Dimensions (H x W x D) |
1.72 x 17.5 x 14.0 in. with PWR-RGD-AC-DC-H / PWR-RGD-LOW-DC-H |
| Weight |
9.5 lb (4.3 kg) |
| Mounting |
Rack mount |
| Power consumption |
35W |
| Performance and scalability features |
| Forwarding rate1 |
95.23 Mpps |
| Forwarding Bandwidth |
64 Gbps |
| Switching bandwidth |
128 Gbps (switching bandwidth is full-duplex capacity) |
| Number of queues / port |
8 egress |
| Unicast MAC addresses3 |
24000 |
| Internet Group Management Protocol (IGMP) multicast groups |
1000 |
| VLAN IDs |
4096 |
| Active VLANs |
1024 |
| IPv4 indirect routes3 |
7000 |
| IPv4 direct routes |
8192 |
| IPv6 indirect routes3 |
3500 |
| Spanning Tree Protocol (STP) instances |
128 |
| Access Control List (ACL) entries (port ACL [PACL], VLAN ACL [VACL], router ACL [RACL]) |
1536 |
| DRAM |
4 GB |
| Flash (user accessible) |
2.5 GB |
| SD card capacity2 |
16 GB |
| SD Access Fabric Edge Support |
Yes (32 VNs) |
| SGT/DGT policies |
2000 |
| IPv4 to SGT binding |
10000 |
| Maximum SVIs |
984 |
| SXP Sessions |
200 |
| GRE Tunnels |
10 |
| Number of Stack Members supported |
4 |
| Network Essentials license (perpetual) |
| Layer 2 switching |
802.1Q, 802.1w, 802.1ab, 802.1s, 802.3ad, 802.3x, Per-VLAN Rapid Spanning Tree (PVRST+), Per-VLAN Spanning Tree (PVST+), Rapid PVST (RPVST), Remote Switched Port Analyzer (RSPAN), Switched Port Analyzer (SPAN), STP, Storm Control, VLAN Trunk Protocol (VTP) v2/v3, 802.1Q Tunneling, Layer 2 Protocol Tunneling (L2PT), Q-in-Q, Selective Q-in-Q, EtherChannel, VLAN Mapping, Loop Detection Guard |
| Multicast |
IGMP v1/v2/v3, IGMP snooping, Multicast Listener Discovery (MLD) snooping |
| Management |
WebUI, MIB, Simple Network Management Protocol (SNMP), syslog, Dynamic Host Configuration Protocol (DHCP) server, NETCONF, Embedded Event Manager (EEM), Cisco Plug and Play (PnP), Express Setup, Resilient Ethernet Protocol (REP) Zero Touch Provisioning (ZTP) |
| Security |
DHCPv6 Guard, IP Source Guard, IPv6 Destination Guard, IPv6 Neighbor Discovery Multicast Suppress, IPv6 Router Advertisement (RA) Guard, IPv6 Snooping, IPv6 Source/Prefix Guard, IPv6 Neighbor Discovery Duplicate Address Detection, Full Flexible NetFlow, PACL, VACL, Network Edge Authentication Topology (NEAT), HTTPS, RADIUS, TACACS+, X.509v3, Secure Shell (SSH), DHCP Snooping, 802.1X, Client Information Signaling Protocol (CISP), Dynamic ARP Inspection (DAI), authentication, authorization, and accounting (AAA), Secure Copy Protocol (SCP), IEEE 802.1AE MACsec-128, TLS 1.3 |
| Quality of Service (QoS) |
802.1p, priority queuing, Modular QoS command-line interface (MQC), class-based shaping and marking, egress policing, egress queuing and shaping, Auto-QoS, Differentiated Services Code Point (DSCP) mapping and filtering, low-latency queuing |
| Layer 3 routing |
Static routing, Open Shortest Path First (OSPF – 1000 routes), OSPFv3, Routing Information Protocol (RIP), Policy-Based Routing (PBR) |
| Industrial Ethernet |
Locate Switch, Swap Drive, Generic Object-Oriented Substation Events (GOOSE) messaging, SCADA Protocol Classification, PTP1 (Default Profile, Power Profile 2011, Power Profile 2017), Network Time Protocol (NTP) to PTP, Bidirectional Forwarding Detection (BFD), PTP as refclock for NTP, PROFINET support, Common Industrial Protocol (CIP) Support, Cisco IOx support, Layer 2 Network Address Translation (L2 NAT), ModBus TCP, ERSPAN, Inter-Range Instrumentation Group (IRIG-B) Input and Output interface (B002, B003, B006, B007, B122, B123, B126, B127 timecode)2, Global Navigation Satellite System (GNSS)/Global Positioning System (GPS)2, dying gasp |
| Redundancy |
REP rings, REP Fast, HSR3, PRP3, MRP, PTP over PRP3, MRP over Stacking4, Fast MRP, PTP over MRP |
| Automation |
YANG, NETCONF, RESTCONF |
| Compliance specifications |
| Electromagnetic emissions |
FCC 47 CFR Part 15 Class A |
| EN 55032 Class A |
| VCCI Class A |
| AS/NZS CISPR 32 Class A |
| CISPR 11 Class A |
| CISPR 32 Class A |
| ICES 003 Class A |
| CNS15936 |
| EN 300 386 |
| EN 61000-3-2 Harmonic Current Emissions |
| EN 61000-3-3 Voltage Fluctuations and Flicker |
| KS C9832 |
| Radio |
EN 303 4132 |
| Electromagnetic immunity |
EN55024/EN5035 |
| CISPR 24/CISPR35 |
| KS C9835 |
| EN 61000-4-2 Electro Static Discharge |
| EN 61000-4-3 Radiated RF |
| EN 61000-4-4 Electromagnetic Fast Transients |
| EN 61000-4-5 Surge |
| EN 61000-4-6 Conducted RF |
| EN 61000-4-8 Power Frequency Magnetic Field |
| EN 61000-4-10 Oscillatory Magnetic Field |
| EN 61000-4-11 AC Voltage Dips |
| EN 61000-4-29 DC Voltage Dips |
| EN 301 489-19 and -12 |
| Industry standards |
EN 61000-6-2 Industrial |
| EN 61000-6-4 Industrial |
| EN 61000-6-1 Light Industrial |
| EN 61326 Industrial Control |
| IEEE 1613:2009 Electric Power Stations Communications Networking |
| IEC 61850-3 Electric Substations Communications Networking |
| EN 50121-4 |
| EN 50121-3-2:2016 +A1:2019 |
| EN 50125-3:2003 |
| EN 50125-1:2014 |
| AREMA C&S Manual 2019 part 11.5.1 and 11.5.2 |
| IP30 (per EN60529) |
| IEC 61850-9-3 (Power Utility Profile) |
| Safety standards and certifications |
Information technology equipment: |
| UL/CSA 60950-1 |
| EN 60950-1, CB to IEC 60950-1 with all country deviations |
| UL/CUL 62368-1, CB to IEC62368-1 with country deviations |
| NOM to NOM-019-SCFI (through partners and distributor) |
| Industrial floor (control equipment): |
| CB report and certificate to IEC 61010-2-201 |
| UL/CSA 61010-2-201 |
| CSA C22.2, No.142 |
| Hazardous locations: |
| UL 121201 (Class l, Div 2, groups A-D) |
| CSA 213 (Class l, Div 2, groups A-D) |
| UL/CSA 60079-0, -7 (Class l, Zone 2, Gc/IIC) |
| IEC 60079-0, -7 IECEx test report (Class l, Zone 2, Gc/IIC, ec) |
| EN 60079-0, -7 ATEX certificate (Class l, Zone 2, Gc/IIC, ec) |
| Operating environment |
Operating temperature: |
| -40° to 75°C (-40° to 167°F) (blower-equipped cabinet) |
| -40° to 60°C (-40° to 140°F) (sealed cabinet)3 |
| -40° to 70°C (-40° to 158°F) (vented cabinet) |
| EN 60068-2-1 |
| EN 60068-2-2 |
| EN 61163 |
| Altitude: |
| Up to 15,000 feet (4572 m) with no temperature derating |
| Up to 40,000 feet (12,192 m) with temperature derating down to 25°C (77°F) |
| Storage environment |
Temperature: -40° to 85°C (-40° to 185°F) |
| Altitude: 15,000 feet (4572 m) |
| IEC 60068-2-14 |
| Humidity |
Relative humidity of 5% to 95% noncondensing |
| IEC 60068-2-3 |
| IEC 60068-2-30 |
| Shock and vibration |
IEC 60068-2-6 (Vibration) |
| IEC 60068-2-27 (Shock) |
| IEC 60068-2-31 (Shock) |
| IEC 60068-2-32 (Shock) |
| IEC 60068-2-64 (Vibration) |
| Corrosion |
IEC 60068-2-52 (salt fog)2 |
| IEC 60068-2-60 (flowing mixed gas)2 |
| Warranty |
Five-year limited hardware warranty on all IE9300 product IDs and all Industrial Ethernet (IE) power supplies. See more information in the Warranty section. |
| Certifications |
IEC/ANSI/ISA-62443-4-1-2018 |
| ANSI/ISA-62443-4-2-2018, IEC-62443-4-2-2019 |
| FIPS 140-2 |
| USGv6-r1 |
| Ready Logo Version 5 |
| Common Criteria |
| ODVA Industrial EtherNet/IP |
| NEMA TS2:2021 |
| Rated MTBF (hours) |
651,580 |