Danh mục

Fortinet FortiAP 231F (FAP-231F): Indoor Wireless AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 ), internal antennas, 2x 10/100/1000 RJ45 port, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included ● 24x7 FortiCare Contract

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị không dây Indoor Wireless Access Point Fortinet FortiAP 231F (FAP-231F)

Mã sản phẩm	FAP-231F
Hardware
Hardware Type	Indoor AP
Number of Radios	3 + 1 BLE
Number of Antennas	3 Dual band Internal Wi-Fi + 1 BLE/ZigBee
Antenna Type and Peak Gain	- PIFA antenna - Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz - BLE antenna 4.0dBi at 2.4GHz band
Frequency Bands (GHz)	2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
Radio 1 Capabilities	- Frequency band: 2.4GHz - Channel width: 20/40MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service
Radio 2 Capabilities	- Frequency band: 5.0GHz - Channel width: 20/40/80MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service
Radio 3 Capabilities	- Frequency bands: 2.4GHz and 5.0GHz - MIMO Chains: 1x1 Frequency Scannin
Maximum Data Rate	- Radio 1: up to 574 Mbps - Radio 2: up to 1201 Mbps - Radio 3: Frequency scanning only
Bluetooth Low Energy Radio	Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power
Interfaces	- 2x 10/100/1000 Base-T RJ45 - 1x Type 2.0 USB - 1x RS-232 RJ45 Serial Por
Power over Ethernet (PoE)	- 1 x 802.3at PoE default - 1 x 802.af PoE no USB function
Simultaneous SSIDs	Up to 16 (14 if background scanning enabled)
EAP Type(s)	EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication	WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP , Web Captive Portal , MAC blocklist & allowlist
Maximum Tx Powerr (Conducted)	- Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined) - Radio 2: 5GHz: 22 dBm / 158 mW (2 chains combined) - Radio 3: NA
IEEE Standards	802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
SSID Types Supported	Local-Bridge, Mesh, & Tunnel
Per Radio Client Capacity	Up to 512 clients per radio (Radio 1 and Radio 2)
Cellular Co-existence	✔
Reset Button	✔
LED Off Mode	✔
Advanced 802.11 Features
OFDMA	✔
Spatial Reuse (BSS Coloring)	✔
UL MU-MIMO 802.11ax mode	✔
DL-MU-MIMO	✔
Enhanced Target Wake Time (TWT	✔
ZeroWait DFS/Agile DFS	✖
Wireless Monitoring Capabilities
Rogue Scan Radio Modes	Background, Dedicated
WIPS / WIDS Radio Modes	Background, Dedicated (recommended)
Packet Sniffer Mode	✔
Spectrum Analyzer	✔
Dimensions
Length x Width x Height	6.0 x 6.0 x 2.86 inches (153.2 x 153.2 x 53.0 mm)
Weight	1.0 lbs (0.543 kg)
Mounting Options	Ceiling, T-Rail, and Wall
Included Accessories	Standard Mount kit for Ceiling, T-Rail, and Wall
Environment
Power Supply	802.3at PoE SP-FAP200-PA-XX or GPI-130
Power Consumption (Maximum)	17 W
Humidity	5–90% non-condensing
Operating / Storage Temperature	32–122°F (0 - 50°C) / -22–158°F (-30–70°C)
Directives	Low Voltage Directive • RoHS
UL2043 Plenum Material	✖
Mean Time Between Failures	>10 Years
IP Rating	N/A
Surge Protection Built In	✔
Hit-less PoE Failover	N/A
Certifications
WiFi Alliance Certified	No
DFS	CE

License & Phụ kiện sử dụng cho FortiAP FAP-231F

SKU	Description
FC-10-PF231-247-02-DD	24x7 FortiCare Contract
SP-FAP200-PA	AC Power Adapter for FAP-231F

- FAP-231F Indoor Wireless AP - Tri radio (802.11 b/g/n/ax 2x2 MU-MIMO, 802.11 a/n/ac/ax 2x2 MU-MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 ), internal antennas, 2x 10/100/1000 RJ45 port, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included.For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP200-PA.

- FC-10-PF231-247-02-DD - 24x7 FortiCare Contract

Data sheet FortiAP 231F