Bạn đang cần tư vấn về sản phẩm Meraki MR86-HW
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Đánh giá
của bạn
Điểm
5/5 trên
1
đánh giá
Wireless Cisco
Wireless HPE
Wireless Extreme
Wireless Huawei
Wireless Meraki
Wireless Alcatel
Wireless FortiAP
Wireless UniFi
Wireless Ruckus
Wireless Juniper
Wireless Planet
Wireless EnGenius
Wireless Linksys
Wireless D-link
Wireless Tp-link
Wireless Cambium
Wireless Zyxel
Wireless Ruijie
Wireless H3C
Wireless Khác
Bộ phát Wifi MR86-HW Meraki MR86 Wi-Fi 6 Outdoor AP
Cisco Meraki MR86 là dòng Wi-Fi 6 Access Point ngoài trời cao cấp, được thiết kế để mang lại hiệu năng mạnh mẽ, tốc độ tổng hợp lên đến 3Gbps, độ bền cao và khả năng quản lý tập trung qua Meraki Cloud Dashboard. Với chuẩn IP67 chống bụi và nước, MR86 phù hợp cho các môi trường khắc nghiệt, đồng thời đảm bảo tốc độ kết nối ổn định và bảo mật doanh nghiệp tích hợp.

Meraki MR86 là Access Point Wi-Fi 6 (802.11ax) với cấu hình 4x4:4 MU-MIMO, hỗ trợ tốc độ tổng hợp lên đến 3 Gbps. Thiết bị tích hợp 4 radio: hai radio phục vụ truy cập (2.4 GHz và 5 GHz), một radio chuyên dụng cho WIDS/WIPS & RF analytics, và một radio Bluetooth Low Energy (BLE). MR86 được thiết kế cho các ứng dụng ngoài trời, mang lại vùng phủ sóng rộng, ổn định và linh hoạt nhờ khả năng gắn anten ngoài.
• Cổng kết nối 1× 2.5GBASE-T uplink, hỗ trợ nguồn PoE+ (802.3at).
• Hỗ trợ anten ngoài, cho phép tùy chỉnh vùng phủ sóng theo yêu cầu triển khai.
• Wi-Fi 6 (802.11ax) với MU-MIMO và OFDMA, tối ưu hiệu suất cho nhiều thiết bị kết nối đồng thời.
• Tốc độ tổng hợp 2.98 Gbps, gồm 2,402 Mbps trên băng tần 5 GHz và 574 Mbps trên băng tần 2.4 GHz.
• Radio chuyên dụng WIDS/WIPS, đảm bảo bảo mật không dây và phân tích RF liên tục 24/7.
• Bluetooth Low Energy (BLE) tích hợp, hỗ trợ beacon và quét thiết bị IoT.
• Thiết kế ngoài trời chuẩn IP67, chống bụi và nước, hoạt động ổn định trong môi trường khắc nghiệt.
• Quản lý cloud Meraki Dashboard, triển khai plug-and-play, giám sát từ xa và cập nhật firmware tự động.
• Bảo mật doanh nghiệp tích hợp, hỗ trợ WPA3, AES encryption, 802.1X, VLAN tagging, PCI compliance và Cisco ISE.
• Traffic shaping thông minh, phân loại và ưu tiên ứng dụng quan trọng, hạn chế lưu lượng không cần thiết.
Meraki MR86 Với độ bền IP67, hiệu suất 3.0 Gbps và anten rời linh hoạt, thiết bị lý tưởng cho các sân vận động, khu công viên lớn, bãi đỗ xe nhiều tầng, khuôn viên trường học, cảng biển và khu công nghiệp – nơi cần vùng phủ sóng Wi-Fi 6 rộng, mật độ cao, chịu được thời tiết khắc nghiệt và quản lý tập trung qua đám mây.
Cisco Meraki MR86 là giải pháp Wi-Fi 6 ngoài trời cao cấp dành cho các tổ chức cần hiệu năng vượt trội, bảo mật toàn diện và khả năng triển khai linh hoạt với anten ngoài. Với khả năng quản lý cloud, tự động tối ưu RF, tích hợp BLE và thiết kế bền bỉ, MR86 giúp doanh nghiệp nâng cao trải nghiệm người dùng, giảm chi phí vận hành và đảm bảo hạ tầng mạng không dây luôn an toàn, ổn định.
| Model | MR86-HW |
| Usage | Rugged/outdoor highest performance Wi-Fi 6 with multigigabit for tough RF and high-density environments |
| Radio specification | 1x 802.11b/g/n/ax 1x 802.11a/n/ac/ax 1x WIDS/WIPS 1x Bluetooth® radio 3.0 Gbit/sec max rate 4x 4x4 MU-MIMO and OFDMA with beamforming |
| Interface | 1x 2.5 Gbps multigigabit Ethernet port 4x External N-type connectors (antennas sold separately) |
| Power | 802.3at PoE |
| Physical design | Rugged industrial design Water and dust sealed (IP67 rated) Vibration and shock tested |
| Product features | Third radio dedicated to security and RF management Priority Voice, Power Save (802.11e/WMM) Hardware-accelerated encryption Band steering High-density support Bluetooth Low Energy radio for beacon and scanning |
| Dimensions | 11.81” × 6.02” × 2.16” (30.0 cm × 15.3 cm × 5.5 cm) |
| Weight | 52.91 oz (1.5 kg) |
| License | Description |
| Meraki Enterprise License | |
| LIC-ENT-1YR | Cisco Meraki MR Enterprise License and Support, 1 Year |
| LIC-ENT-3YR | Cisco Meraki MR Enterprise License and Support, 3 Years |
| LIC-ENT-5YR | Cisco Meraki MR Enterprise License and Support, 5 Years |
| Meraki Advanced License | |
| LIC-MR-ADV-1Y | Cisco Meraki MR Advanced License and Support, 1 Year |
| LIC-MR-ADV-3Y | Cisco Meraki MR Advanced License and Support, 3 Years |
| LIC-MR-ADV-5Y | Cisco Meraki MR Advanced License and Support, 5 Years |
Xem thêm
Rút gọn
| Model | MR86 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support; Concurrent operation of all four radios |
| Antenna | Supports external antennas; compatible models include MA-ANT-20/25/27 and AIR-ANT2513P4M-N= (antennas sold separately) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at compatible); Power consumption: 30W max (802.3at required); PoE injector sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45) |
| Mounting | All standard mounting hardware included; mounts to walls and vertical poles |
| Physical Security | Two security screws; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating and storage temperature: -40°C to 55°C (-40°F to 131°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m); IP67 environmental rating |
| Reliability | Mean Time Between Failure (MTBF): 1,566,656 hrs at +25°C |
| Physical Dimensions | 11.81” x 6.02” x 2.16” (30.0 cm x 15.3 cm x 5.5 cm), not including cable gland, mounts or antennas; Weight: 1.5 kg |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC Part 15C/15E, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Outdoor access point 1-year hardware warranty with advanced replacement |
| Ordering Information | MR86-HW: Meraki MR86 Cloud Managed 802.11ax Outdoor AP; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; MA-ANT-20 Dual-Band Omni Antennas; MA-ANT-25 Dual-Band Patch Antenna; MA-ANT-27 Dual-Band Sector Antenna; AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam antenna; Meraki AP license required |
Vui lòng để lại số điện thoại hoặc lời nhắn, nhân viên sẽ liên hệ trả lời bạn sớm nhất
Meraki MR86-HW
| Model | MR86 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support; Concurrent operation of all four radios |
| Antenna | Supports external antennas; compatible models include MA-ANT-20/25/27 and AIR-ANT2513P4M-N= (antennas sold separately) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at compatible); Power consumption: 30W max (802.3at required); PoE injector sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45) |
| Mounting | All standard mounting hardware included; mounts to walls and vertical poles |
| Physical Security | Two security screws; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating and storage temperature: -40°C to 55°C (-40°F to 131°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m); IP67 environmental rating |
| Reliability | Mean Time Between Failure (MTBF): 1,566,656 hrs at +25°C |
| Physical Dimensions | 11.81” x 6.02” x 2.16” (30.0 cm x 15.3 cm x 5.5 cm), not including cable gland, mounts or antennas; Weight: 1.5 kg |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC Part 15C/15E, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Outdoor access point 1-year hardware warranty with advanced replacement |
| Ordering Information | MR86-HW: Meraki MR86 Cloud Managed 802.11ax Outdoor AP; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; MA-ANT-20 Dual-Band Omni Antennas; MA-ANT-25 Dual-Band Patch Antenna; MA-ANT-27 Dual-Band Sector Antenna; AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam antenna; Meraki AP license required |
| Model | MR86 |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio; 5 GHz 802.11a/n/ac/ax client access radio; Dual-band WIDS/WIPS, spectrum analysis & location analytics radio; 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support; Concurrent operation of all four radios |
| Antenna | Supports external antennas; compatible models include MA-ANT-20/25/27 and AIR-ANT2513P4M-N= (antennas sold separately) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA, UL-OFDMA, Target Wake Time (TWT), BSS Coloring; 4x4 MIMO with four spatial streams; SU-MIMO, UL/DL MU-MIMO; Maximal Ratio Combining (MRC) & beamforming; 20/40 MHz channels (802.11n); 20/40/80 MHz channels (802.11ac Wave 2 & 802.11ax); Up to 1024-QAM; Packet aggregation |
| Power | Power over Ethernet: 42.5–57 V (802.3at compatible); Power consumption: 30W max (802.3at required); PoE injector sold separately |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45) |
| Mounting | All standard mounting hardware included; mounts to walls and vertical poles |
| Physical Security | Two security screws; Concealed mount plate with anti-tamper cable bay |
| Environment | Operating and storage temperature: -40°C to 55°C (-40°F to 131°F); Humidity: 5–95% non-condensing; Operating altitude: up to 40,000 ft (12,192 m); IP67 environmental rating |
| Reliability | Mean Time Between Failure (MTBF): 1,566,656 hrs at +25°C |
| Physical Dimensions | 11.81” x 6.02” x 2.16” (30.0 cm x 15.3 cm x 5.5 cm), not including cable gland, mounts or antennas; Weight: 1.5 kg |
| Security | Integrated Layer 7 firewall with mobile device policy management; Real-time WIDS/WIPS with Air Marshal; Guest access isolation; VLAN tagging (802.1q) & IPsec VPN tunneling; PCI compliance reporting; WPA3-Personal/Enterprise, WPA3-Enhanced Open (OWE), WPA2, WPA, WEP; AES encryption; 802.1X authentication; Cisco ISE integration; Enterprise Mobility Management (EMM) & MDM integration |
| Quality of Service | Advanced Power Save (U-APSD); WMM Access Categories with DSCP & 802.1p support; Layer 7 traffic identification & shaping; Voice/video optimizations |
| Mobility | Fast Layer 2 roaming (PMK, OKC, 802.11r); Distributed or centralized Layer 3 roaming |
| Analytics | Embedded location analytics & device tracking; Global Layer 7 traffic analytics per network, device, and application |
| LED Indicators | 1 LED for power/booting/firmware upgrade status |
| Regulatory | RoHS compliant; Safety approvals: CSA, CB 60950 & 62368; UL 2043 (Plenum Rating); Radio approvals: FCC Part 15C/15E, RSS-247, EN 300 328, EN 301 893, AS/NZS 4268, IFT, NOM-208, NCC LP0002; EMI approvals: FCC Part 15B, ICES-003, EN 301 489, EN 55032, EN 55024, CISPR 22, VCCI; Exposure approvals: FCC Part 2, RSS-102, EN 50385, EN 62311, EN 62479, AS/NZS 2772 |
| Warranty | Outdoor access point 1-year hardware warranty with advanced replacement |
| Ordering Information | MR86-HW: Meraki MR86 Cloud Managed 802.11ax Outdoor AP; MA-INJ-4: Meraki MR 802.3at PoE Injector; MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector; MA-ANT-20 Dual-Band Omni Antennas; MA-ANT-25 Dual-Band Patch Antenna; MA-ANT-27 Dual-Band Sector Antenna; AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam antenna; Meraki AP license required |
MR86 phù hợp với những mô hình triển khai thực tế nào?
Với độ bền IP67, anten rời và hiệu suất cao, MR86 lý tưởng cho:
- Sân vận động, bãi đỗ xe nhiều tầng, công viên lớn
- Khuôn viên trường học, khu công nghiệp, cảng biển
- Khu nghỉ dưỡng, điểm du lịch ngoài trời
- Sự kiện tạm thời, lễ hội cần vùng phủ rộng, chịu được thời tiết khắc nghiệt
Với anten rời (omni, sector, patch), MR86 cho phép tùy chỉnh vùng phủ sóng chính xác theo nhu cầu, từ phủ sóng rộng 360° đến tập trung vào một dải hẹp dài.
Meraki MR86 hỗ trợ tối đa bao nhiêu người dùng đồng thời?
MR86 được thiết kế cho mật độ cao ngoài trời, với cấu hình 4×4:4 MU-MIMO trên cả hai băng tần và tốc độ 3.0 Gbps. Trong thực tế triển khai tại các khu vực như bãi đỗ xe, sân vận động, công viên, MR86 có thể phục vụ 150-300 người dùng chủ động (active users) một cách ổn định. Con số thực tế phụ thuộc vào loại anten sử dụng, loại ứng dụng và môi trường RF.
Tốc độ tổng hợp tối đa của MR86 là bao nhiêu?
MR86 hỗ trợ tốc độ tổng hợp lên đến 3 Gbps, gồm 2,402 Mbps trên băng tần 5 GHz và 574 Mbps trên băng tần 2.4 GHz.