Danh mục

Model	AP1261 (OAW-AP1261-RW-B)
Radio specifications	• AP type: Outdoor, dual radio, 5 GHz 802.11ac 2x2:2 MU-MIMO and 2.4 GHz 802.11n 2x2:2 MIMO • 5 GHz: 2*2 MIMO with two spatial streams, up to 867Mbps wireless data rate • 2.4 GHz: Two spatial streams Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2x2 HT40 client devices • Supported frequency bands (country-specific restrictions apply): ¬ 2.400 to 2.4835 GHz ¬ 5.150 to 5.250 GHz ¬ 5.250 to 5.350 GHz ¬ 5.470 to 5.725 GHz ¬ 5.725 to 5.850 GHz • Available channels: Dependent on configured regulatory domain • DFA (Dynamic Frequency Adjustment) optimizes available channels and provides proper transmission power • Short guard interval for 20-MHz, 40-MHz, and 80-MHz channels • Transmit beam forming (TxBF) for increased signal reliability and range 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU) • Supported data rates (Mbps): ¬ 802.11b: 1, 2, 5.5, 11 ¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 ¬ 802.11n: 6.5 to 300 (MCS0 to MCS15) ¬ 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2) • Supported modulation types: ¬ 802.11b: BPSK, QPSK, CCK ¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM ¬ 802.11n high-throughput (HT) support: HT 20/40 ¬ 802.11ac very high throughput (VHT) support: VHT 20/40/80
Interfaces	• 1× 10/100/1000BASE-T autosensing (RJ-45) port, IEEE 802.3at PoE in • Reset button: Factory reset. Press for 5s, SYS LED will quickly flash for 3s, then AP will restart and restore factory configurations
Visual indicators (5 LEDs)	• For system and radio status ¬ PWR ON: power on. ¬ SYS ON: Bootloader-OS is loading or running. ¬ SYS Flashing: Bootloader-OS upgrading. ¬ 2.4G ON: 2.4GHz SSID created and running ¬ 5G ON: 5GHz SSID created and running ¬ WAN ON: WAN linkup
Security	• 802.11i, WPA2, WPA3, WPA, AES 128-256 bits • 802.1X • WEP, Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP) • Firewall: ACL, wIPS/wIDS • Portal page authentication
Antenna	• Built-in 2×2:2 @ 2.4GHz, 2x2:2 @ 5GHz ¬ Integrated antennas for 2x2 MIMO with maximum antenna gain of 7.67dBi in 2.4 GHz and 7.77dBi in 5 GHz.
Receive sensitivity	• -95 in 2.4GHz 1Mbps, -91 in 5GHz 6Mbps.
Maximum transmit power (per chain) ± 2dBm	• 23dBm in 2.4GHz • 23dBm in 5GHz Note: Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.
Power	• Maximum (worst case) power consumption: 20W (802.3at PoE)
Mounting	• Pole/ Wall mounting (Mounting kit shipped default with AP), angle is un-adjustable.
Environmental	• Operating temperature: -20°C to 55°C • Humidity: 5% to 95% non-condensing • Storage and transportation Temperature: -40°C to +85°C • Chassis Rating: IP67
Dimensions/Weight	• Single AP excluding packing box: 180mm (W) x 298mm (D) x 86.5mm (H) - 1065g • Including AP, packing box: 380mm (W) x 230mm (D) x 107mm (H) - 1565g
Capacity	• Up to 8 SSID per radio (total 16 SSID) • Support for up to 384 associated client devices per AP
Software features	• Up to 8 SSID per radio (total 16 SSID) • Support for up to 384 associated client devices • Up to 255 APs per Web managed (HTTP/HTTPS) cluster. • Auto channel selection • Auto transmit power control • Bandwidth control per SSID • L2 roaming • L3 roaming with CSP/ESP • Captive Portal • Internal User Database • Radius Client • Wireless QoS • Band steering • Client based smart load balance • White/black list • Zero-touch provisioning (ZTP) with support of third-party partner • NTP server client • ACL • Rogue AP location and containment • System log report • Wireless Attack Detection Note: some features are limited by local regulatory settings
IEEE standard	• IEEE 802.11a/b/g/n/ac wave2 • IEEE 802.11e WMM • IEEE 802.11h, 802.11i, 802.11e QoS • 802.11k Radio Resource Management • 802.11v BSS Transition Management • 802.11r Fast roaming
Regulatory and certification	• CB Scheme Safety, cTUVus • Wi-Fi Alliance (WFA) certified • 802.11a/b/g/n/ac • CE Marked • RoHS, REACH, WEEE

OAW-AP1261-RW-B : Outdoor 802.11ac Wave2 access point, Dual-Radio, 802.11n 2x2:2 + 802.11ac 2x2:2, 1x GbE, integrated antennas. Includes outdoor mounting kit for pole/wall mounting.

Data sheet Alcatel-Lucent OmniAccess Stellar AP1261 Outdoor 802.11ac wave2 wireless Access Point