Danh mục

Industrial Switch Planet IGS-1020PTF-12V: Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Ethernet Switch w/ 12V Booster (-40~75 degrees C) ● Switch Fabric: 20Gbps & Throughput: 14.8Mpps ● PoE Power Budget: 240W (max. 30 watts per port) ● 12~56V DC redundant power, IP30 aluminum case, DIN-rail and wall-mount design.

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị chuyển mạch Công nghiệp Planet IGS-1020PTF-12V

Model	IGS-1020PTF-12V
Hardware Specifications
Copper Ports	8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PoE Injector Port	8-ports with 802.3at PoE+ injector function (Port-1 to Port-8)
SFP Slots	2 x 1000BASE-SX/LX/BX SFP interfaces (Ports 9 to 10) Compatible with 100BASE-FX SFP
Connector	Removable 6-pin terminal block - Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
DIP Switch	Standard/Extend mode (Extend mode for Ports 5 to 8 only)
Power Requirements	12~56V DC, 6A (max.)
Power Consumption	Max. 5.6 watts/19BTU@56V DC input (System) Max. 8.4 watts/29BTU@56V DC input (Ethernet Full Loading) Max. 252.1 watts/860BTU@56V DC input (Ethernet + PoE Full Loading)
Dimensions (W x D x H)	77 x 106 x 152mm
Weight	1164g
Enclosure	IP30 aluminum case
Installation	DIN-rail/ wall-mount
ESD Protection	6KV
Switch Specifications
Switch Architecture	Store-and-Foward
Switch Fabric	20Gbps
Throughput (packet per second)	14.8Mpps@ 64 bytes packet
Address Table	8K entries
Buffer Memory	4M bits on-chip buffer memory
Flow Control	IEEE 802.3x pause frame for full duplex Back pressure for half duplex
Jumbo Frame	9Kbytes
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard	IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type	End-span
Power Pin Assignment	1/2 (+), 3/6 (-)
PoE Power Output	Per port 54V DC Max. 30 watts
PoE Power Budget (max.)	240W maximum @54V DC 120W maximum@24V DC 60W maximum@12V DC
Environments
Temperature	Operating: -40~75 degrees C Storage: -40~85 degrees C
Humidity	Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing)

Data sheet Planet IGS-1020PTF-12V

Switching
Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 8K MAC address table size 20Gbps switch fabric 9K jumbo frame Hardware-based DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmission distance of 250m at speed of 10Mbps Automatic address learning and address aging
Industrial Case and Installation
IP30 aluminum case DIN-rail and wall-mount designs 12~56V redundant power with reverse polarity protection Supports 6KV DC Ethernet ESD protection -40 to 75 degrees C operating temperature
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)