Thiết bị Wireless Zyxel WAC500H
| Model | WAC500H |
| Wireless | |
| Standard | IEEE802.11 ac/n/g/b/a |
| MIMO | MU-MIMO |
| Wireless speed | 2.4 GHz: 300Mbps 5 GHz: 866Mbps |
| Frequency band | 2.4 GHz USA (FCC): 2.412 to 2.462 GHz Europe (ETSI): 2.412 to 2.472 GHz 5 GHz USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz |
| Bandwidth | 20-, 40- and 80-MHz |
| Conducted typical transmit output power | US (2.4GHz/5GHz) 23/26dBm EU (2.4GHz/5GHz) 19/26dBm |
| RF Design | |
| Antenna type | 2x2 MIMO Embedded Antenna |
| Antenna gain | 2.4GHz 3 dB 5GHz 4 dBi |
| Minimum receive sensitivity | Up to -99 dBm |
| WLAN feature | |
| Band Steering | Yes |
| WDS / Mesh | Yes |
| Fast roaming | Pre-authentication, PMK caching and 802.11r/k/v |
| DCS | Yes |
| Load balancing | Yes |
| Security | |
| Encryption | WEP WPA WPA2-PSK WPA3 |
| Authentication | WPA WPA2-Enterprise EAP IEEE 802.1X RADIUS authentication |
| Access management | L2-isolation MAC filtering |
| Networking | |
| IPv6 | Yes |
| VLANs | Yes |
| WMM | Yes |
| U-APSD | Yes |
| DiffServ marking | Yes |
| Management | |
| Operating mode | Nebula Cloud managed Controller-managed Standalone |
| ZON Utility | Discovery of Zyxel switches, APs and gateways Centralized and batch configurations IP configuration IP renew Device reboot Device locating Web GUI access Firmware upgrade Password configuration |
| Zyxel Wireless Optimizer | WiFi AP planning WiFi coverage detection Wireless health management |
| Web UI/ CLI | Yes |
| SNMP | Yes |
| Physical Specifications | |
| Item | Dimensions (WxDxH)(mm/in.) 173 x 97 x 29 / 6.81 x 3.82 x 1.14 Weight (g/lb.) 223/0.49 |
| Packing | Dimensions (WxDxH)(mm/in.) 195 x 120 x 53 / 7.68 x 4.72 x 2.09 Weight (g/lb.) 444/0.98 |
| Included accessories | Multi-purpose mounting bracket with screws |
| MTBF(hr) | 542,017 |
| Physical Interfaces | |
| Ethernet port | 1x 10/100/1000M uplink 2x 10/100/1000M downlink (Including one PoE PSE) |
| Power | Input: AC 100 - 240V - 50/60 Hz 0.3A; Output: DC +12V 1A (PoE PSE disabled) PoE 802.3at: power draw 18 W (Include 7W for PoE PSE) PoE 802.3af: power draw 11 W (PoE PSE disabled) |
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt