Name: HPE Q9H57A
Brand: HPE
SKU: Q9H57A
Rating: 5 (21 reviews)

Hỗ trợ trực tuyến

Tư vấn

Hỗ trợ Tư Vấn

0909648899

Kinh doanh

Kinh Doanh 01

0917684899

Kinh Doanh 02

0917993131

Kinh Doanh 03

0915793030

Kinh Doanh 04

0906641689

Kỹ thuật

Hỗ trợ Kỹ Thuật 1

02862578356

Hỗ trợ Kỹ Thuật 2

02862578355

Mô tả sản phẩm

Thiết bị phát sóng Wifi Aruba AP-514 (Q9H57A)

Model	AP-514 (Q9H57A)
Wi-Fi radio specifications	AP type: Indoor, dual radio, 5GHz 802.11ax 4x4 MIMO and 2.4GHz 802.11ax 2x2 MIMO 5GHz radio: Four spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max) Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max) Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) 2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to 2SS HE40 802.11ax client devices (max) Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to 2SS HE20 802.11ax client devices (typical) Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
Wi-Fi antennas	Four (female) RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.
Additional interfaces	E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps) Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX 2.5Gbps speed complies with NBase-T and 802.3bz specifications PoE-PD: 48Vdc (nominal) 802.3af/at/bt (class 3 or higher) 802.3az Energy Efficient Ethernet (EEE) E1: 10/100/1000BASE-T Ethernet network interface (RJ-45) Auto-sensing link speed and MDI/MDX 802.3az Energy Efficient Ethernet (EEE) Link aggregation (LACP) support between both network ports for redundancy and increased capacity DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector) Capable of sourcing up to 1A / 5W to an attached device Bluetooth 5 and Zigbee (802.15.4) radio (2.4GHz) Bluetooth 5: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514) Visual indictors (two multi-color LEDs): for System and Radio status Reset button: factory reset, LED mode control (normal/off) Serial console interface (proprietary, micro-B USB physical jack) Kensington security slot
Power sources and power consumption	The AP supports direct DC power and Power over Ethernet (PoE; on port E0) When both power sources are available, DC power takes priority over PoE Maximum (worst-case) power consumption: DC powered: 16.0W PoE powered (802.3af, IPM enabled): 13.5W PoE powered (802.3at/bt): 20.8W All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered). Maximum (worst-case) power consumption in idle mode: 12.6W (PoE) or 9.7W (DC) Maximum (worst-case) power consumption in deep-sleep mode: 5.9W (PoE) or 1.5W (DC)
Mechanical specifications	Dimensions/weight (AP-515; unit, excluding mount bracket): 200mm (W) x 200mm (D) x 46mm (H)/7.9” (W) x 7.9” (D) x 1.8” (H) 810g/28.5oz Dimensions/weight (AP-515; shipping): 230mm (W) x 220mm (D) x 72mm (H)/9.1” (W) x 8.7” (D) x 2.8” (H) 1010g/35.5oz
Environmental specifications	Operating conditions Temperature: 0C to +50C/+32F to +122F Humidity: 5% to 93% non-condensing AP is plenum rated for use in air-handling spaces ETS 300 019 class 3.2 environments Storage and transportation conditions Temperature: -40C to +70C/-40F to +158F Humidity: 5% to 93% non-condensing ETS 300 019 classes 1.2 and 2.3 environments