| Model |
IE-3400-8P2S-E |
| Description |
Catalyst IE3400 with 8 GE PoE/PoE+, 2 GE SFP, Adv. Modular, Network Essentials |
| Hardware configurations |
| Total ports |
10 |
| 10/100/1000 RJ45 Copper ports |
8 |
| 100/1000 SFP ports |
2 |
| 1GE/2.5G RJ45 Copper ports |
- |
| Software license |
Network Essentials |
| Hardware specification |
| PoE power budget |
480W |
| Removable storage |
USB, SD card |
| Alarms |
2 alarms in, 1 alarm out |
| Console ports |
1 RS-232 (via RJ-45), 1 USB Mini Type B |
| Power inputs |
Dual DC power inputs |
| Physical configurations |
| Dimensions (H x W x D) |
6 in. X 4.4 in. X 5.3 in. 15.2 cm. x 11.2 cm. x 13.5cm |
| Weight |
5.0 lbs 2.3 Kg |
| Mounting |
DIN rail |
| Performance and scalability features |
| Forwarding rate |
Line rate for all ports and all packet sizes |
| Number of queues |
8 |
| Unicast MAC addresses |
16K |
| Internet Group Management Protocol (IGMP) multicast groups |
1K |
| No. of VLANs |
256 |
| IPv4 Indirect routes1 |
3000 |
| IPv6 Indirect routes1 |
512 |
| Spanning Tree Protocol (STP) instances |
128 |
| Access Control Entries (PACL/VACL/RACL) |
3K |
| DRAM |
4 GB |
| Flash [User Accessible] |
1.5 GB |
| SD card capacity2 |
4 GB, 16 GB |
| Jumbo Frames |
8996 bytes |
| Power specifications |
| Input voltage range |
Redundant DC input voltage: 9.6 to 60VDC
48VDC is required for PoE and 54VDC is required for PoE+ |
| Input current |
10.6A |
| Power consumption |
47W |
| MTBF (hours) |
401.313 |
| Network Essentials License (Perpetual) |
| Layer 2 switching |
IEEE 802.1Q, 802.1w,802.1ab,802.1s, 802.3ad standard, NTP, UDLD, CDP, LLDP, unicast MAC filter, PAgP, LACP VTPv2, VTPv3, EtherChannel, Q-in-Q tunneling, voice VLAN, PVST+, MSTP, RSTP, Selective Q-in-Q, Layer 2 Tunneling |
| Multicast |
IGMPv1, v2, v3 snooping, IGMP filtering, IGMP querier |
| Management |
WebUI, MIB, SmartPort, SNMP, syslog, DHCP server, SPAN session, RSPAN, FSPAN, FRSPAN, Express setup, Delayless IPDT |
| Security |
Port security, 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP inspection, IP source guard, guest VLAN, MAC authentication bypass, 802.1x multidomain authentication, storm control - unicast, multicast, broadcast, SCP, SSH, SNMPv3, TACACS+, RADIUS server/client, MAC address notification, BPDU guard, Access Lists(PACL/RACL/VACL), SUDI 2099 (Secure Unique Device identifier), Full Flexible NetFlow (FNF), MACsec-128, FIPS 140-2 |
| Quality of Service (QoS) |
Ingress policing, rate limit, egress queuing/shaping, auto QoS |
| IPv6 |
IPv6 host support, SNMP over IPv6, HTTP/HTTP(s) over IPv6, SNMP over IPv6, Syslog over IPv6, DHCPv6 relay source, DHCPv6 bulk lease query (RFC 5460), IPv6 stateless Auto Config, SCP/SSH, Radius, TACACS+, NTP over IPv6, IPv6 VRF aware BGPv6, IPV6 ND cache expire, IPv6 support for TFTP, IPv6 DNS transport, IPv6 QoS, IPv6 FHS RA Guard, IPv6 FHS DHCPv6 Guard |
| Layer 3 routing |
Inter-VLAN routing, Static routing |
| Industrial Ethernet |
CIP Ethernet/IP, 3IEEE 1588 PTP v2 (default and power), PROFINET |
| Redundancy |
Resilient Ethernet Protocol (REP) ring, PROFINET-Multi Ring Protocol (MRP), REP Negotiated, Fast REP, REP Autodiscovery, REP ZTP Support, Parallel redundancy protocol (PRP)2, PTP over PRP, High-Availability Seamless Redundancy (HSR-SAN), Device Level Ring (DLR), HSR-PRP Dual Redbox |
| Utility |
Dying gasp, SCADA protocol classification – GOOSE messaging, MODBUS TCP/IP |
| Automation |
YANG, NETCONF, RESTCONF |
| Industrial Management |
Layer 2 switching with 1:1 switch Network Address Translation (L2NAT)1 |
| IOx |
Container (Native Docker), Cyber Vision, Secure Equipment Access |
| Compliance Specifications |
| Industrial Automation Control System |
IEC 62443-4-1
IEC 62443-4-2 |
| Electromagnetic emissions |
FCC 47 CFR Part 15 subpart B Class A
EN 55032/CISPR 32 Class A
VCCI Class A
AS/NZS CISPR 32 Class A
CISPR 11 Class A
ICES 003 Class A
CNS 13438 Class A3
KN 32 Class A3
EN 300 386 |
| Electromagnetic immunity |
CISPR 24 / CISPR 35
EN55024/ EN55035
KN 35
EN 61000-4-2 Electro Static Discharge (air – 15kV, contact – 8kV)
EN 61000-4-3 Radiated RF (10V/m UTP, 20V/m STP)
EN 61000-4-4 Electromagnetic Fast Transients (4kV)
EN 61000-4-5 Surge (2KV/1KV Power, 4KV STP)
EN 61000-4-6 Conducted RF (10Vrms UTP)
EN 61000-4-8 Power Frequency Magnetic Field (1000A/m)
EN 61000-4-10 Damped Oscillatory Magnetic Field (100 A/m)
EN 61000-4-16 Conducted CM Disturbances (30V, Cont/ 300V, 1 sec)
EN 61000-4-17 Ripple Immunity DC Power (10%)
EN 61000-4-18 Damped Oscillatory Wave (2.5kV, 1MHz)
EN-61000-4-29 DC Voltage Dips and Interruptions |
| Industry standards |
EN 61000-6-2 Industrial Immunity
EN 61000-6-4 Industrial Emissions
EN 61000-6-1 Light Industrial Immunity
EN 61326-1 Measurement, Control and Laboratory Equipment
EN 61131-2 (EMC - Emission and Immunity)
IEEE 1613 Electric Power Stations Communications Networking
EN/IEC 61850-3 Electric Substations Communications Networking
ODVA Industrial EtherNet/IP
NEMA TS 2-2016
AREMA C and S section 11, 19
IP30 |
| Marine I |
DNV Certification according to class guideline DNV-CG-0339
Additional Standards:
IEC 60945, IACS UR E10
Marine DNV GL – Ships; High speed and light craft |
| Safety standards and certifications |
Information Technology Equipment:
UL/CSA 60950-1, IEC 60950-1 CB with all country deviations
UL/CSA 62368-1, IEC 62368-1 CB with all country deviations
Industrial floor (control equipment):
UL/CSA 61010-2-201
CB report and certificate to IEC/EN 61010-2-201
Hazardous locations:
UL121201(Class l, Div 2, groups A-D)
CSA 213 (Class l, Div 2, groups A-D)
UL/CSA 60079-0, -15 (Class l, Zone 2, Gc/IIC)
IEC 60079-0, -15 IECEx test report (Class l, Zone 2, Gc/IIC)
EN 60079-0, -15 ATEX certificate (Class l, Zone 2, Gc/IIC) Cabinet enclosure required |
| Operating environment |
Operating temperature:
-40°C to +70°C (40 LFM vented enclosure)
-40°C to +60°C (sealed enclosure)
-40°C to +75°C (Min. 200 LFM fan or blower-equipped enclosure)
+85°C (type tested for 16 hours)
Altitude: up to 15,000 feet |
| Storage environment |
Temperature: -40°C to +85°C degrees
Altitude: 15,000 feet
IEC 60068-2-14 |
| Humidity |
Relative humidity of 5% to 95% non-condensing
IEC 60068-2-78
IEC 60068-2-30 |
| Shock and vibration |
IEC 60068-2-27 (operational shock, 50G, 3ms, half sine)
IEC 60068-2-27 (non-operational shock, 65-80G, 9ms, trapezoidal)
MIL-STD-810, Method 514.4
IEC 60068-2-6 (vibration-sinusiodal, 5Hz-150Hz) |
| Corrosion |
IEC 60068-2-52 (salt fog)2
IEC 60068-2-60 (flowing mixed gas)2 |
| Railway |
EN50125-1: 2014
EN50125-3: 2003
EN50121-4 Railway – Signaling and Telecommunications Apparatus
EN50121-3-2 / EN50155 (EMC) |
| Warranty |
Five-year limited hardware warranty on all IE3300 product IDs and all Industrial Ethernet (IE) power supplies. See more information under the Warranty section |