31 Đường số 9, KDC Cityland, P.10, Q.Gò Vấp, TP.HCM
028 62578355
HOTLINE
0909648899  
028 62578355
Trang chủ > Sản phẩm > Thiết bị mạng Juniper > Switch Juniper > Juniper EX4400‑48MXP

Juniper EX4400‑48MXP

Bộ chuyển mạch 48-port Multi-gigabit PoE++ Juniper EX4400‑48MXP

  • 12 cổng 100M/1/2.5/5/10GbE PoE++
  • 36 cổng 100M/1/2.5GbE PoE++
  • 2 cổng 100GbE cho Uplink/Stacking
  • Tùy chọn Module Uplink mở rộng 10/25/40/100GbE
  • Công suất PoE tối đa 3600W
  • Năng lực chuyển mạch: 1020 Gbps
  • Tốc độ chuyển tiếp gói: 758 Mpps
  • Nguồn 2000 W AC AFO
  • Giá bán : Liên hệ để có giá tốt
  • Tình trạng : Còn hàng


Juniper EX4400‑48MXP là thiết bị chuyển mạch thuộc dòng EX4400 cung cấp khả năng truy cập an toàn, sẵn sàng trên nền tảng đám mây, lý tưởng cho các chi nhánh, và trung tâm dữ liệu của doanh nghiệp. Thiết bị EX4400 kết hợp tính đơn giản của đám mây, sức mạnh của Mist AI và nền tảng phần cứng mạnh mẽ với hiệu suất và bảo mật tốt nhất. Cung cấp đầy đủ các tính năng Lớp 2 và Lớp 3, EX4400 cho phép triển khai trong nhiều mô hình khác nhau. Công nghệ Virtual Chassis của Juniper cho phép tối đa 10 thiết bị chuyển mạch EX4400 được kết nối và quản lý liền mạch như một thiết bị duy nhất, cung cấp giải pháp mở rộng hệ thống khi cần thiết.

EX4400-48MXP, cung cấp 12 cổng PoE 100M/1/2.5/5/10GbE và 36 cổng PoE 100M/1/2.5GbE, công suất lên tới 90 W mỗi cổng với tổng công suất PoE là 3600W (hai bộ nguồn) lý tưởng cho việc triển khai Wi-Fi 6/7, tòa nhà thông minh bao gồm hệ thống chiếu sáng, cảm biến IoT. Bộ chuyển mạch EX4400 cung cấp tùy chọn 4 x 1/10GbE SFP+, 4 x 1/10/25GbE SFP28 và 1 x 100GbE QSFP28 mô-đun mở rộng, hai cổng 100GbE chuyên dụng hỗ trợ kết nối Virtual Chassis và có thể được sử dụng làm cổng Uplink.

Đặc điểm nổi bật của dòng Juniper EX4400

  • Hỗ trợ quản lý qua Cloud, được điều khiển bởi Mist AI với Juniper Mist Wired Assurance và Trợ lý mạng ảo Marvis.
  • Công nghệ Virtual Chassischo phép người dùng cấu hình và quản lý 10 thiết bị EX dưới dạng một thiết bị logic duy nhất.
  • Hỗ trợ IEEE 802.11ae MACsec với AES-256 để bảo mật dữ liệu liên kết.
  • Thiết kế cho thiết bị Wi-Fi 6/7, cung cấp công suất PoE lên tới 3600W cho mỗi switch.
  • Hỗ trợ Ethernet VPN–Virtual Extensible LAN (EVPN-VXLAN).
  • Thiết bị EX4400 chạy Junos OS, hệ điều hành mạnh mẽ của Juniper, hỗ trợ tất cả các thiết bị của Juniper.

Thông số kỹ thuật

Model EX4400-48MXP
Access Port Configuration • 48-port GbE (12x100M/1/2.5/5/10GbE + 36x100M/1/2.5GbE)
PoE++ Ports • 48
PoE++ Budget 1 PSU/2 PSU • 1650 W/ 3600 W
Power Supply Rating • 2000 W AC
Cooling • AFO (front-to-back airflow)
Hardware specifications
Switching engine mode • Store and forward
Memory • DRAM: 4 GB with Error Correcting Code (ECC) on all models
• Storage: 20 GB on all models
CPU • 2.2 GHz Quad-Core Intel x86 CPU
Packet switching capacities
(maximum with 64 Byte Packets)
• 510 Gbps (unidirectional)/1020 Gbps (bidirectional)
Software specifications
Layer 2/Layer 3 throughput (Mpps)
(maximum with 64 Byte Packets)
• 758 Mpps
Security • MAC limiting (per port and per VLAN)
• Allowed MAC addresses: 112,000
• Dynamic Address Resolution Protocol (ARP) inspection (DAI)
• IP source guard
• Local proxy ARP
• Static ARP support
• Dynamic Host Configuration Protocol (DHCP) snooping
• Captive portal
• Persistent MAC address configurations
• Distributed denial of service (DDoS) protection (CPU control path flooding protection)
• Simple Certificate Enrollment Protocol (SCEP)
Layer 2 switching • Maximum MAC addresses per system: 112,000
• Jumbo frames: 9216 Bytes
• Number of VLANs supported: 4093
• Range of possible VLAN IDs: 1 to 4094
• Virtual Spanning Tree (VST) instances: 510
• Port-based VLAN
• Voice VLAN
Layer 3 features: IPv4 • Maximum number of ARP entries: 24,000
• Maximum number of IPv4 unicast routes in hardware: 130,048 prefixes; 81,000 host routes
• Maximum number of IPv4 multicast routes in hardware: 40,000 multicast routes
• Routing protocols: RIPv1/v2, OSPF, BGP, IS-IS
• Static routing
• Routing policy
• Bidirectional Forwarding Detection (BFD)
• L3 redundancy: Virtual Router Redundancy Protocol (VRRP)
• VRF-Lite: 1000
Physical specifications
Backplane • 400 Gbps Virtual Chassis interconnect to combine up to 10 units as a single logical device
Extension module options • EX4400-EM-4S, 4 port SFP+
• EX4400-EM-4Y, 4 port SFP28
• EX4400-EM-1C, 1 port QSFP28
Power options • Power supplies: Autosensing; 100-120 V/200-240 V; 2000 W AC AFO dual load sharing hot-swappable internal redundant power supplies
• Maximum current inrush: 30 amps
• Minimum number of PSUs required for fully loaded chassis: 1 per switch
Dimensions (W x H x D) • With power supply and fans installed: 44.17 x 4.37 x 43 cm
• Height: 1 U
System weight • EX4400 switch : 5.9 kg
• 2000 W AC power supply: 0.93 kg
• EX4400-EM-4S: 0.09 kg
• EX4400-EM-4Y: 0.13kg
• EX4400-EM-1C: 0.11kg
• Fan module: 0.12 kg
Environmental ranges • Operating temperature: 0° to 45° C
• Storage temperature: -40° to 70° C
• Operating altitude: up to 6000 ft at 40° C (1828.8m)
• Nonoperating altitude: up to 16,000 ft (4,877 m)
• Relative humidity operating: 5% to 90% (noncondensing)
• Relative humidity non-operating: 0% to 90% (noncondensing)
Cooling • Field-replaceable fans: 2
• Total maximum airflow throughput with two power supplies: 61 CFM

EX4400-48MXP : 12x100M/1/2.5/5/10GbE + 36x100M/1/2.5GbE ports PoE++ power + 2000 W AC PS (provides 1650/3600W PoE++ power with single/dual PS)

Data sheet EX4400 Line of Ethernet Switches

Sản phẩm liên quan

Juniper EX4400-48MP

Bộ chuyển mạch 48-port Multi-gigabit PoE++ Juniper EX4400-48MP

  • 12...

Liên hệ để có giá tốt

Juniper EX4400-24MP

Bộ chuyển mạch 24-port Multi-gigabit PoE++ Juniper EX4400-24MP

  • 24...

Liên hệ để có giá tốt

Juniper EX4400-48XP

Bộ chuyển mạch 48-port 1GE PoE++ Juniper EX4400-48XP

  • 48...

Liên hệ để có giá tốt

Hỗ trợ trực tuyến