Danh mục

Model	XGS-6350-48X2Q4C
Hardware Specifications
QSFP28 Interfaces	4, each supports native 100/40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes
QSFP+ Interfaces	2, each supports 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes
SFP+ Slots	48 10GBASE-SR/LR SFP+ interface Compatible with 1000BASE-SX/LX/BX SFP transceiver
MNG	1 x 10/100/1000Base-T RJ45 port
Console	1 x RJ45-to-DP9 serial port (9600, 8, N, 1)
USB	1 x USB 2.0
Dimensions (W x D x H)	442 x 404 x 44 mm, 1U height
Weight	8.8kg
Power Consumption	147 watts/504.3 BTU (maximum)
Power Requirements	AC 100~240V, 50/60Hz DC 36~72V (optional)
Fan	4
Switching Performance
Switch Architecture	Store-and-Forward
Switch Capacity	1.92Tbps/non-blocking
Switch Throughput	1440Mpps@64bytes
Address Table	64K MAC address table with auto learning function
Shared Data Buffer	9MB
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Jumbo Frame	9K
Environments & Standards Conformance
Operating	Temperature: 0 ~ 50 degrees C Relative Humidity: 10 ~ 85% (non-condensing)
Storage	Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Regulatory Compliance	FCC Part 15 Class A, CE

Data sheet Planet XGS-6350-48X2Q4C

Software Funtions	XGS-6350-48X2Q4C Layer 3 48-Port 10G SFP+ + 2-Port 40G QSFP+ + 4-Port 100G QSFP28 Managed Switch
IPv4 Layer 3 Functions
IP Routing Protocol	RIP v1/v2 OSPFv2 BGP (Border Gateway Protocol) Static routing
Routing Features	VRRP Policy routing Load balance through equal-cost routing BFD (Bidirectional Forwarding Detection) for OSPF and BGP
IPv6 Layer 3 Functions
IP Routing Protocol	RIPng OSPFv3 BGP4+
Multicast Routing Protocol	PIM-DM and PIM-SM PIM-SSM
Routing Features	Manual tunnel ISATAP tunnel 6-to-4 tunnel
IPv6 Functions	ICMPv6, DHCPv6, ACLv6, IPv6 Telnet IPv6 Neighbor Discovery Path MTU Discovery
Layer 2 Function
Port Configuration	Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Bandwidth control on each port Port loopback detect
VLAN	IEEE 802.1Q tag-based VLAN, IEEE 802.1ad Q-in-Q VLAN stacking/tunneling GVRP for VLAN management Private VLAN Up to 4K VLAN groups
Spanning Tree Protocol	IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) BPDU protection, root protection
Ring	Supports ITU-T G.8032 ERPS
IPv4 IGMP Snooping	IPv4 IGMP v1/v2/v3 snooping IGMP Fast Leave IPv4 Querier mode support IGMP Filtering and IGMP Throttling IGMP Proxy reporting
IPv6 MLD Snooping	IPv6 MLD v1/v2 snooping Multicast VLAN Register (MVR)
Bandwidth Control	Ingress and Egress At least 64Kbps stream
Link Aggregation	IEEE 802.3ad LACP/static trunk Supports 8 groups with 8 ports per trunk group
QoS	8 priority queues on all switch ports Traffic Supervision and Traffic Shaping Scheduling for priority queues - Weighted Round Robin (WRR) - Strict priority (SP) - SP+WRR Traffic classification: - IEEE 802.1p CoS - DSCP - DiffServ - Precedence - TOS - VLAN ID - IP ACL - MAC ACL Policy-based ingress and egress QoS 802.1p and DSCP priority remark
Authentication	IEEE 802.1x port-based network access control AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
Security Function
Access Control List	Supports Standard and Expanded ACL IP-based ACL/MAC-based ACL Time-based ACL Up to 1K entries
Security	Port isolation Port security, supports IP + MAC + port binding Identification and filtering of L2/L3/L4 based ACL Defend against DOS or TCP attacks Suppression of broadcast, multicast and unknown unicast packet DHCP Snooping, DHCP Option 82 Command line authority control based on user levels
AAA	TACACS+ and IPv4/IPv6 over RADIUS
Authentication	IEEE 802.1x port-based network access control
Management Function
System Configuration	Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces	SSHv2, SSLv3, TLSv1.0 and SNMPv3 Maximum 8 sessions for SSH and Telnet connection
System Management	Supports both IPv4 and IPv6 Protocols Supports the user IP security inspection for IPv4/IPv6 SNMP Supports MIB and TRAP Supports TFTP, FTP Supports IPv4/IPv6 NTP Supports RMON 1, 2, 3, 9 groups Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password The right configuration for users to adopt RADIUS server’s shell management Supports Security IP safety net management function: avoid unlawful landing at non-restrictive area Supports TACACS+ Supports SPAN, RSPAN
Event Management	Supports syslog server for IPv4 and IPv6