Danh mục

Model	RG-AP720-I
Target Deployments	• For campuses, offices, hospitals, and hotspots of service providers
Basic Specifications
Radio	• Concurrent dual-radio dual-band
Protocol	• 802.11a/b/g/n/ac Wave 2
Operating Bands	• 802.11b/g/n: 2.4GHz to 2.483GHz • 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)
Antenna	• Built-in Smart Antenna 2×2 MU-MIMO
Max Throughput	• 400Mbps@2.4GHz • 867Mbps@5GHz • 1267Mbps per AP
Spatial Streams	• 2
Modulation	• OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps • DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps • MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receiver Sensitivity	• 11b: -91dBm (1Mbps), -88dBm(5Mbps), -85dBm(11Mbps) • 11a/g: -89dBm (6Mbps), -80dBm (24Mbps), -76dBm (36Mbps), -71dBm (54Mbps) • 11n: -83dBm@MCS0，-65dBm@MCS7，-83dBm@MCS8，-65dBm@MCS15 • 11ac HT20: -83dBm (MCS0), -57dBm (MCS9) • 11ac HT40: -79dBm (MCS0), -57dBm (MCS9) • 11ac HT80: -76dBm (MCS0), -51dBm (MCS9)
Maximum Transmit Power	• 100mw
Adjustable Power	• 1dBm
IP Rating	• IP41
Ports
Service Port	• 2 10/100/1000BASE-T Ethernet ports (LAN1 port supports PoE & Uplink) 1 USB port
Management Port	• 1 console port
Power
Power Supply	• Local power supply (DC 48V) and PoE+ (802.3af/at) (DC Power adapters should be purchased from third-party vendors separately if needed.)
Power Consumption	• <12.95W
WLAN
Maximum clients per AP	• Up to 256
BSSID capacity	• Up to 16 per radio • Up to 32 per AP
SSID hiding	• Support
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID	• Support
Remote Intelligent Perception Technology (RIPT)	• Support
X-speed	• Support
Intelligent load balancing based on the number of users or traffic	• Support
STA control	• SSID/radio-based
Bandwidth control	• STA/SSID/AP-based speed control
Preference for 5GHz (band select)	• Support
Wireless position tracking	• Support
Dynamic Frequency Selection(DFS)	• Future Release Support
Security
PSK, Web, and 802.1x authentication	• Support
Data encryption	• WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
SMS authentication	• Support
PEAP authentication	• Support
Data frame filtering	• Whitelist, static/dynamic blacklist
User isolation	• Support
Rogue AP detection and countermeasure	• Support
Dynamic ACL assignment	• Support
RADIUS	• Support
Wireless Intrusion Detection System(WIDS)	• Support
Wireless Intrusion Prevention System (WIPS)	• Support
Bluetooth
iBeacon	• Support
Routing
IPv4 address	• Static IP address or DHCP reservation
IPv6 CAPWAP tunnel	• Support
ICMPv6	• Support
IPv6 address	• Manual or automatic configuration
Multicast	• Multicast to unicast conversion
Management and Maintenance
Network management	• SNMP v1/v2C/v3, Telnet, TFTP, Web management
One-click Optimization	• Support (need to integrate with WIS)
Fault detection and alarm	• Support
Cloud AC management	• Support
Statistics and logs	• Support
FAT/FIT switching	• The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. • The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
External Characteristics
Lock	• Support
LED Indicators	• 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)
Relevant Standard
Wi-Fi Alliance Certification	• Support
Safety Standard	• GB4943, EN/IEC 60950-1
EMC Standard	• GB9254, EN301 489
Health Standard	• EN 62311
Radio Standard	• EN300 328, EN301 893
Vibration Standard	• IEC60068 2-31 • ETSI EN300 019 • NEBS GR-63-CORE
Specifications
Dimensions (W x D x H) (mm)	• 180 × 180 × 20 (Height of AP only, excluding case and mount kit)
Weight	• 0.37kg
Work Environment
Temperature	• Operating Temperature: -10°C to 50°C • Storage Temperature: -40°C to 70°C
Humidity	• Operating Humidity: 5% to 95% (non-condensing) • Storage Humidity: 5% to 95% (non-condensing)
Installation Mode	• Ceiling/wall-mountable

RG-AP720-I : Indoor Wireless Access Point, built-in Smart Antenna, dual-radio, dual-band, 2 spatial streams, access rate up to 1.267Gbps per AP. Support concurrent 802.11ac Wave2 and 802.11a/b/g/n, FAT/FIT modes, 2 10/100/1000BASE-T ports, support PoE+ and local power supply, integrated with BLE/Bluetooth iBeacon

Data sheet Ruijie RG-AP720-I Indoor 802.11ac Wave 2 Access Point