Ruijie RG-AP880-I Ultra-high-performance Wi-Fi 6 (802.11ax) Indoor Wireless Access Point :
Thiết bị Wi-Fi 6 Indoor Access Point Ruijie RG-AP880-I
Model | RG-AP880-I |
Hardware specifications | |
Radio | • Dual-radio dual-band: - Radio 1: 2.4G 11ax: 4×4 MIMO - Radio 2: 5G 11ax: 8x8 MIMO |
Protocol | • Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
Operating Bands | • 802.11b/g/n/ax :2.4G ~ 2.483GHz • 802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz • (vary depending on different countries) |
Spatial Streams | • Up to 12: 4×4:4 in 2.4GHz , 8×8:8 in 5GHz |
Max Throughput | • Maximum throughput of 2.4G: 1.15Gbps • Maximum throughput of 5G: 4.8Gbps • Maximum throughput per AP: 5.95Gbps |
Modulation | • OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps • DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps • MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM OFDMA (up to 1024-QAM) |
Receiver Sensitivity | • 11b: -96dBm (1Mbps), -93dBm (5Mbps), -89dBm (11Mbps) • 11a/g: -91dBm (6Mbps), -85dBm (24Mbps), -80dBm (36Mbps), -74dBm (54Mbps) • 11n: -90dBm (MCS0), -70dBm (MCS7), -89dBm (MCS8), -68dBm (MCS15) • 11ac HT20: -88dBm (MCS0), -63dBm (MCS9) • 11ac HT40: -85dBm (MCS0), -60dBm (MCS9) • 11ac HT80: -82dBm (MCS0), -57dBm (MCS9) • 11ax HT80: -82dBm (MCS0), -57dBm (MCS9), -52dBm (MCS11) |
Antenna | • Integrated antenna design (5th gen X-Sense patent smart antenna) |
Antenna Gain | • 2.4G: 3dBi • 5G: 3dBi |
Service Ports | • 1 100M/1000M/2.5G/5G/10G Base-T (PoE In), 1 10G SFP+, 1 10/100/1000M Base-T ports (PoE In), 1 10/100/1000M Base-T ports (LAN/IoT Expansion) |
Management Port | • 1 console port |
USB | • 1 USB 2.0 port |
IoT Capability | • BLE |
Reset Button | • Support |
Anti-theft Lock | • Support |
LED Indicator | • 1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) |
Transmit Power | • ≤100mw(20dBm) (vary depending on different countries) |
Adjustable Power | • 1dBm |
Power Supply | • Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed) • 802.3bt(HPoE) recommended or 802.3at(PoE+) with lower performance. • 802.3af(PoE) device cannot power up |
Power Consumption | • <40W |
Physical Specifications | |
Temperature | • Operating Temperature: -10°C to 45°C • Storage Temperature: -40°C to 70°C |
Humidity | • Operating Humidity: 5% to 95% (non-condensing) • Storage Humidity: 5% to 95% (non-condensing) |
Installation Mode | • Ceiling/wall-mountable |
Dimensions (W x D x H) | • 290mm×64mm (Height of the AP only, excluding the mount kit and modelling) |
Weight | • AP 3.05Kg, Mount Kit 0.2Kg |
IP Rating | • IP41 |
MTBF | • 250,000 hours |
Certifications and Compliance | |
Safety Standard | • GB4943, EN/IEC 60950-1 |
EMC Standard | • GB9254, EN301 489 |
Health Standard | • EN 62311 |
Radio Standard | • SRRC, EN300 328, EN301 893 |
Software Specifications | |
WLAN | |
Maximum clients per AP | • 1024 |
Recommended clients per AP | • 64 |
BSSID capacity | • Up to 32 |
SSID hiding | • Support |
5G Priority (Band Steering) | • Support |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | • Support |
Remote Intelligent Perception Technology (RIPT) | • Support |
Intelligent device recognition technology | • Support |
Intelligent load balancing based on the number of users or traffic | • Support |
STA control | • SSID/radio-based |
Bandwidth control | • STA/SSID/AP-based bandwidth control |
Data encryption | • WPA(TKIP), WPA-PSK, WPA2(AES), WEP(64/128 bits) |
PSK and web authentication | • Support |
PPSK authentication (For Employee) | • Support (require wireless controller) |
802.1x authentication | • Support |
PEAP authentication | • Support |
Data frame filtering | • Whitelist, static/dynamic blacklist |
User isolation | • Support |
Rogue AP detection and countermeasure | • Support |
Dynamic ACL assignment | • Support |
RADIUS | • Support |
CPU Protection Policy (CPP) | • Support |
Network Foundation Protection Policy (NFPP) | • Support |
IP | |
IPv4 and IPv6 address | • Support |
Multicast routing | • Multicast to unicast conversion |
DHCP service | • DHCP Snooping, Option 82, Server, Client |
Management and Maintenance | |
Supported wireless LAN controllers | • Ruijie WS Series Wireless Controller • Ruijie MACC-Base Software Controller • Ruijie Cloud (Public Cloud) |
Management protocol | • Telnet, SSH, TFTP, Web |
Wireless Intelligent AI Optimization Service (WIS) | • Support |
SNMP | • SNMPV1,V2c,V3 |
Syslog / Debug | • Support |
FAT/FIT/MACC mode switching | • Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
RG-AP880-I : Ultra-high-performance Wi-Fi 6 (802.11ax) indoor wireless access point, concurrent dualband dual-radio (4x4:4 in 2.4GHz, 8x8:8 in 5GHz), up to 12 total spatial streams and maximum 5.95Gbps wireless throughput, 4 Ethernet ports (1 100M/1000M/2.5G/5G/10GBase-T, 1 10G SFP+, 1 10/100/1000M Base-T ports, 1 10/100/1000M Base-T ports (LAN/IoT Expansion), integrated with BLE, support PoE+ and local power supply.
Ruijie RG-AP730-L Indoor 802.11ac Wave 2 Access Point :
Liên hệ để có giá tốt
Ruijie RG-AP720-I Indoor 802.11ac Wave 2 Access Point :
Liên hệ để có giá tốt
Ruijie RG-AP810-L Indoor Wi-Fi 6 AX1800 SME Access Point :
Liên hệ để có giá tốt
Ruijie RG-AP820-L(V2) Indoor Wi-Fi 6 Enterprise Access Point...
Liên hệ để có giá tốt
Ruijie RG-AP820-L(V3) Indoor Wi-Fi 6 AX3000 Multi-Gigabit...
Liên hệ để có giá tốt
Ruijie RG-AP840-I Indoor High-density Wi-Fi 6 Enterprise Access...
Liên hệ để có giá tốt